ScoobyNet.com - Subaru Enthusiast Forum

ScoobyNet.com - Subaru Enthusiast Forum (https://www.scoobynet.com/)
-   Drivetrain (https://www.scoobynet.com/drivetrain-11/)
-   -   I Need An INNER CV Joint (https://www.scoobynet.com/drivetrain-11/708355-i-need-an-inner-cv-joint.html)

Mr.impreza 26 August 2008 03:18 PM

I Need An INNER CV Joint
 
i have a 1.6 impreza and need a inner cv joint/half shaft. i have been looking literally everywhere and cant find one. will a 1.8 joint fit a 1.6? i need the joint as mine is knocking very bad around corners.

thanks for any replys

PeeVee 28 August 2008 05:48 PM

You don't specify which year & spec car you have so I will assume that you have the "full time" four wheel drive version & that you are talking about the front drive shafts as you say that it happens around corners... Based on this it is more likely to be the outer joint that is knocking, not the inner.

Subaru like to keep things simple, so they tend to have one set of shafts for manual gearbox cars and another for auto's. This usually means, for example, that a 1.6 manual saloon will have the same shafts fitted as manual versions of the 1.8, 2.0 normally asperated & turbo cars. it dosen't even matter if it's a saloon or wagon.

The only catch, is that over the years thay have modifyed the shafts, so you wouldn't be able to fit a 93my shaft into a 2000my car.

If you give me your VIN number then I will let you know which cars would be a suitable donor.

Phil

Mr.impreza 28 August 2008 09:11 PM

vin is JF1GC3BR0EB008056 its a 1.6 manual 1995 GL 2WD UK-Spec and the inner joint on the output shaft of the box needs replacing

Andygreer 29 August 2008 12:59 AM

id personaly not post ya VIN number on a internet forum mate

PeeVee 29 August 2008 11:57 AM

Unfortunately you are in a position of having a unique set of shafts fitted to your car as it is a 2wd version. Your car was built in the 3rd month of 1994 so it's a 94my.

The only cars with compatible shafts are:

Impreza 1.6 2wd manual transmission - 92, 93 & 94my (Saloon or Estate)

Legacy 1.6 - Any Variant - 92 & 93my


Hope you find a second hand shaft, as an inner joint from Subaru is £199.00 & a whole shaft will set you back £476.12. :eek2:

Just in case the part numbers are of use to you, they are as follows:

Inner Front Joint - 28092AA000

Front Driveshaft Complete - 28021AA481


With regard to posting your Vin no: I wouldn't worry too much mate, In this day and age of internet, it's very easy to find out the ID of cars.


Phil

stoneface 30 August 2008 08:00 PM


Originally Posted by Barretts Motorsport (Post 8097257)

With regard to posting your Vin no: I wouldn't worry too much mate, In this day and age of internet, it's very easy to find out the ID of cars.


Phil

Do tell! ;)


All times are GMT +1. The time now is 12:17 PM.


© 2024 MH Sub I, LLC dba Internet Brands