ScoobyNet.com - Subaru Enthusiast Forum

ScoobyNet.com - Subaru Enthusiast Forum (https://www.scoobynet.com/)
-   Suspension (https://www.scoobynet.com/suspension-12/)
-   -   tyres rubbing?? (https://www.scoobynet.com/suspension-12/708156-tyres-rubbing.html)

Northy 7 25 August 2008 02:46 PM

tyres rubbing??
 
hi i have a 2000 turbo x reg and have owned it for 6 weeks now but when im hooning it around corners etc with people in the car i get quite bad tyre rub on the rears?
When pressing down on the boot it comes straight back up with no bounce and when driving it feels solid and firm over bumps etc and feels fine?I took it to my freind at my local tyre and battery centre and he said that it has got the wrong offset wheels on there and the wrong size tyre which i knew as they are 205/55/16.As you can see in the pics the wheels stick out quite far but i still think that there is to much roll as you can see in the rubbing lines on the tyre.i have some kei racing fin 7 17" wheels coming this week so hopfully that will help but i still tink it shouldnt be rubbing this bad even with the wrong offset wheells or is this amount of roll normal for a scoob?

Thanks
Adam

http://i93.photobucket.com/albums/l7...7/Image042.jpg
http://i93.photobucket.com/albums/l7...7/Image043.jpg
http://i93.photobucket.com/albums/l7...7/Image044.jpg
http://i93.photobucket.com/albums/l7...7/Image045.jpg
http://i93.photobucket.com/albums/l7...7/Image046.jpg
http://i93.photobucket.com/albums/l7...7/Image016.jpg
Just a shot to show you the scoob after a good clean
http://i93.photobucket.com/albums/l7...Image018-1.jpg

scoobynewbie72 25 August 2008 03:35 PM

can u take a wheel off and see if the offset its stamped on the inside,
You wanna be careful with those tyres now they have slashes on them.

scoobyverysoon 25 August 2008 03:51 PM

im sort of the same as you ive got a setup of 225/40/18 and the rears rub so im down sizeing them to 215/35/18 like yours they stuck out slightly at the back

Northy 7 25 August 2008 04:04 PM


Originally Posted by scoobynewbie72 (Post 8089604)
can u take a wheel off and see if the offset its stamped on the inside,
You wanna be careful with those tyres now they have slashes on them.

ok m8 do you know what the corrrect offset should be?

Northy 7 25 August 2008 04:05 PM


Originally Posted by scoobyverysoon (Post 8089623)
im sort of the same as you ive got a setup of 225/40/18 and the rears rub so im down sizeing them to 215/35/18 like yours they stuck out slightly at the back

do you get much roll when hooning around roundabouts etc m8?

nixxon 30 August 2008 11:09 PM


Originally Posted by Northy 7 (Post 8089649)
ok m8 do you know what the corrrect offset should be?

ET55.


All times are GMT +1. The time now is 03:29 PM.


© 2024 MH Sub I, LLC dba Internet Brands