ScoobyNet.com - Subaru Enthusiast Forum

ScoobyNet.com - Subaru Enthusiast Forum (https://www.scoobynet.com/)
-   ScoobyNet General (https://www.scoobynet.com/scoobynet-general-1/)
-   -   Pictures of my trip to Zen Performance (https://www.scoobynet.com/scoobynet-general-1/706266-pictures-of-my-trip-to-zen-performance.html)

DazP1-956 14 August 2008 09:37 PM

Pictures of my trip to Zen Performance
 
The Zen time attack car, amazing bit of kit.

http://i303.photobucket.com/albums/n...Picture259.jpg

DazP1-956 14 August 2008 09:39 PM

I wouldn't mind that engine in mine

http://i303.photobucket.com/albums/n...Picture261.jpg

DazP1-956 14 August 2008 09:40 PM

The turbo is f*cking hoooooooge!

http://i303.photobucket.com/albums/n...Picture263.jpg

DazP1-956 14 August 2008 09:42 PM

You don't get to see many 22b's, really nice looking scooby

http://i303.photobucket.com/albums/n...Picture264.jpg

http://i303.photobucket.com/albums/n...Picture265.jpg

DazP1-956 14 August 2008 09:44 PM

A picture of my engine bay just getting cleaned up ready for the mapping

http://i303.photobucket.com/albums/n...Picture249.jpg

DazP1-956 14 August 2008 09:46 PM

My car on the rollers getting 400.1bhp, sweet!!!!!!

http://i303.photobucket.com/albums/n...cture277-1.jpg

RA Dunk 14 August 2008 09:48 PM

nice figures, what spec do you have to reach that then :)

DazP1-956 14 August 2008 10:05 PM

This is the turbo i'm running, the new MD321H.

http://i303.photobucket.com/albums/n...6/0307e531.jpg

DazP1-956 14 August 2008 10:11 PM

Also:
GT spec headers
Power enterprise 550cc injectors
Full 3" Blitz Nur spec R and open neck de-cat
Fuellab fuel pressure regulator with stainless steel lines
Inlet manifold spacers
Front mounted intercooler
K&N induction kit
and a few other bits and bobs, there the main bits though.:)

stevie1982 14 August 2008 10:19 PM

on a std p1 lump or you uprated it

RA Dunk 14 August 2008 10:30 PM


Originally Posted by DazP1-956 (Post 8069788)
Also:
GT spec headers
Power enterprise 550cc injectors
Full 3" Blitz Nur spec R and open neck de-cat
Fuellab fuel pressure regulator with stainless steel lines
Inlet manifold spacers
Front mounted intercooler
K&N induction kit
and a few other bits and bobs, there the main bits though.:)

good spec very similar to mine except i have the 20g with a scottimax map :)


Originally Posted by stevie1982 (Post 8069815)
on a std p1 lump or you uprated it

P1 block is the same as the STi so shouldent be any problems with the power

D.O.M 14 August 2008 11:12 PM

The 22b looks so immaculate. Love it!

M535I 15 August 2008 07:00 AM

lovin the pics mate as above modified 22b must be super rare !! are you runin forged internals as im going for the td05 20g rather than the md series turbos due to they would kill my cdb ?

DazP1-956 15 August 2008 09:00 PM

Glad you like the pictures, my P1 has got the Sti 8 bottom end which is fine at this sort of power level. My engine has done less than 9000 miles so should be o.k. I've got some more mods i'm going to be doing next year anyway.

M444GY 16 August 2008 02:08 PM

cool pics mate . stunning cars

minty 24 August 2008 10:03 PM

NICE !!!!! :thumb:

SqeekyMclean 25 August 2008 03:43 AM

Nice to see someone posts pics! Ace

Rest of you text posters learn.....

Terminator X 25 August 2008 02:29 PM

P1 is one of the nicest looking Scoobs ever IMHO :) 400bhp too is nice ;)

Has it been reliable as some P1s have suffered engine wise?

TX.

DazP1-956 25 August 2008 08:19 PM


Originally Posted by Terminator X (Post 8089513)
P1 is one of the nicest looking Scoobs ever IMHO :) 400bhp too is nice ;)

Has it been reliable as some P1s have suffered engine wise?

TX.

Hi mate, i've had alot of performance cars and this is easily the cheapest and most reliable one i've ever had. My car has the late STi 8 bottom end which is alot stronger than the early engines, it's a shame that the P1 was riddled with such a poor engine to start with, I know some P1's are over 100,000 miles on the same engine. I love all scoobys mate, but i've always wanted a P1. Next year i'm going to be getting the 2.5ltr cosworth engine, i just wanted to see what i could get out of this engine. Take it easy bud. Daz

RyanSTI 25 August 2008 08:32 PM

looks great man!, i;ll be heading over to zen soon to get my scoob sorted yay!!

Granby 25 August 2008 09:14 PM


Originally Posted by DazP1-956 (Post 8069716)
The Zen time attack car, amazing bit of kit.

http://i303.photobucket.com/albums/n...Picture259.jpg

I know that yellow type r in the background :notworthy about time Alan got the car back on the road :D

DazP1-956 26 August 2008 08:34 PM


Originally Posted by Granby (Post 8090311)
I know that yellow type r in the background :notworthy about time Alan got the car back on the road :D

It's a nice scooby, it's made my mate want a yellow 2 door now. Has he had it off the road for long? I took my car off the road for 3 months whilst i was upgrading all the bits on the engine and replacing every bolt for stainless ones. I waited for ages for some parts! But it was all worth it:thumb:

Granby 26 August 2008 08:51 PM


Originally Posted by DazP1-956 (Post 8092096)
It's a nice scooby, it's made my mate want a yellow 2 door now. Has he had it off the road for long? I took my car off the road for 3 months whilst i was upgrading all the bits on the engine and replacing every bolt for stainless ones. I waited for ages for some parts! But it was all worth it:thumb:

Think it's been off the road since the beginning of the year, i believe he's gonna get it back for his trip to the Corsica rally :notworthy

eureka 26 August 2008 08:56 PM

did you see mine up there i forget what it looks like but will be well worth the wait
blue blob eye with zen decals

DazP1-956 27 August 2008 09:25 PM


Originally Posted by eureka (Post 8092179)
did you see mine up there i forget what it looks like but will be well worth the wait
blue blob eye with zen decals


I did see a that car mate, are you getting alot of work done?? You must be if you can't remember what it looks like:lol1: I'm so glad i can do all my own work, atleast i know the only reason why it's not getting done is because of my lazy ass!! It would do my head in if my car was somewhere else for ages:( .


All times are GMT +1. The time now is 12:31 AM.


© 2024 MH Sub I, LLC dba Internet Brands