ScoobyNet.com - Subaru Enthusiast Forum

ScoobyNet.com - Subaru Enthusiast Forum (https://www.scoobynet.com/)
-   Wanted (https://www.scoobynet.com/wanted-18/)
-   -   bung needed asap (https://www.scoobynet.com/wanted-18/682242-bung-needed-asap.html)

Clarkie172 17 April 2008 07:10 PM

bung needed asap
 
anyone have a bung for big re-circ pipe on newage? PM me

Clarkie

hull sti 17 April 2008 07:37 PM

how big we talkin mate.?

Clarkie172 17 April 2008 09:19 PM

Im not sure on the size mate to be honest. Anybody know?

Clarkie172 18 April 2008 04:44 PM

anybody know the size?

scooby-tc 18 April 2008 05:11 PM

a bung for what?????

Clarkie172 18 April 2008 08:40 PM

when you fit a VTA you have to put the small pipe back onto the new DV and block the big re-circ pipe up with a bung(usually come as part of a fitting kit)

scooby-tc 18 April 2008 10:26 PM

oh right i thought you were removing the dv altogether.I'd seriously think about a VTA as it will probably make your car run like a bag of crap as the MAF will be misreading causing the ECU to chuck in a load of extra fuel causing the car to become a bit jerky and use more fuel than normal.

Just my 2p :D

Clarkie172 19 April 2008 06:04 AM

I know I have read alll the debates about them mate. I am going to trial it and see for myself! If it does ruin the running/fuel I will simply swap back!

caperbility 19 April 2008 09:31 AM


Originally Posted by Clarkie172 (Post 7818143)
anybody know the size?

Its not everything though is it mate!:lol1:

Anyway down to business I fitted a Baileys dump valve on my 1996 sti v3 ra and blocked the pipe with a 34mm bung. I didnt have 1 and they were about 7 quid on flea bay.I ended up with a guy on scoobynet making me 1 for £5 delivered which was nice.

Hope that helps:thumb:

Ian 19 April 2008 09:47 AM

use a bit of broom handle, this it is around the same size.

Clarkie172 19 April 2008 09:49 AM

Im not sure if its the same size as the newage though? Anyone confirm? I could prob get one made at work but unsure of size!

caperbility 19 April 2008 09:51 AM

could you not unclip the pipe and measure it?:)

STI5300 19 April 2008 10:20 AM

Hi, I'm the "Nice Guy" on Scooby net who made Caperbility a bung, if you find out the size, I'll do you one for £5 posted. Bargain.

Clarkie172 19 April 2008 10:28 AM

Hello mr nice guy! Ill try and get the size then Ill have one off you cheers buddy.

I dont want to take off the re-circ pipe and measure it as its supposidly a nightmare to get back on. (Someone said you pretty much have to disconnect other end of piping to re-fit onto the DV)-I'll have to as a last resort but if someone knows the size, it saves me quite a big job I believe

Clarkie

caperbility 19 April 2008 11:00 AM


Originally Posted by STI5300 (Post 7819525)
Hi, I'm the "Nice Guy" on Scooby net who made Caperbility a bung, if you find out the size, I'll do you one for £5 posted. Bargain.

Excellent bung it was too:notworthy :notworthy :notworthy

Clarkie172 19 April 2008 01:27 PM

Been told mine is 32mm anyone confirm?

joz8968 20 April 2008 03:09 AM

--..

caperbility 20 April 2008 09:42 AM

Have a look at item number 200217488462 on fleabay m8:thumb:


All times are GMT +1. The time now is 04:48 AM.


© 2024 MH Sub I, LLC dba Internet Brands