ScoobyNet.com - Subaru Enthusiast Forum

ScoobyNet.com - Subaru Enthusiast Forum (https://www.scoobynet.com/)
-   Interior (https://www.scoobynet.com/interior-15/)
-   -   Aircon controll light colour (https://www.scoobynet.com/interior-15/670115-aircon-controll-light-colour.html)

charis_sti 25 February 2008 12:39 AM

Aircon controll light colour
 
is there anyway i can change the green standard light of the center console(aircon controllers) with red so that it can match my defi gauges??

charis_sti 01 March 2008 02:27 AM

bttt

v8voodoo 01 March 2008 06:07 AM

Charis,

I believe if you look over on the NASIOC forums some have done it, but it seems quite an involved job.

agent003 11 March 2008 08:13 PM

Done it on my classic and was fairly easy....Swaped them over with red led's but first you need to find the live feed into the panel and add a resistor there :thumb:

scooby-tc 11 March 2008 09:26 PM

Like i have done you mean
http://img.photobucket.com/albums/v1...Jan2008082.jpg

:thumb:

It isnt too bad to do as long as you are competant with a soldering iron

charis_sti 13 March 2008 12:15 AM

exactly like that :)
how did you do it?

scooby-tc 13 March 2008 12:35 AM

6 ultra bright red 5v LEDs,the correct resistor and a length of wire and a soldering iron :D basically to have to solder the resistor to the +ve of the circuit board and the other end of the resistor to the +ve leg of the first LED then daisy chain the LEDS till you get to the last one where the wire goes from the -ve leg of the LED to the -ve of the circuit board.There is a better description with pics on NASIOC its a bit fiddly if you're not competent with a soldering iron

agent003 13 March 2008 01:50 AM

On mine I just bridged the input live wire with a resistor and as for the bulbs I used the original bulb housing with the led's in place of oe ones.


All times are GMT +1. The time now is 09:42 AM.


© 2024 MH Sub I, LLC dba Internet Brands