OBD light on/flashing! Please help
I have a 2004 sti, full de-cat system & ECU remap.
started the car yesterday all fine, got up the road OBD light came on, then started flashing and car started to labour really badly with no power. after a few mins the light stopped flashing, but stayed on, car felt normal again? The car keeps going through this phase static light/flashing and labouring. Can anyone please advise me of probable cause/solution to this? after reading some other threads, could be the 02 sensor? cheers guys. Paul |
I would take it to a garage & put it on the diagnostics just to be on the safe side. De-cats can cause lights to flash too. Hope it aint serious fella. :thumb:
|
as said you need to plug it in to see the recorded error code(s).
Simon |
thanks for the feedback guys, only confirms that the car must go to a garage.
would a subaru dealer fix this fault even if the car is fully de-cated? Paul |
see if they will reset the ecu.. this will clear all learnt data and if it is an issue related to exhaust it may run fine for a short time until it relearns unless it is det related in which case it will be instant.
Simon |
All times are GMT +1. The time now is 05:46 AM. |
© 2024 MH Sub I, LLC dba Internet Brands