ScoobyNet.com - Subaru Enthusiast Forum

ScoobyNet.com - Subaru Enthusiast Forum (https://www.scoobynet.com/)
-   General Technical (https://www.scoobynet.com/general-technical-10/)
-   -   cutting out (https://www.scoobynet.com/general-technical-10/621857-cutting-out.html)

johnroake 18 July 2007 07:08 AM

cutting out
 
everytime i come up to traffice lights or junctions etc, any place i have to slow down, the cars revs drop right down and the car cuts out. sometimes it just goes dead for a sec then revs go back up again. any ideas wat this could be? and how much it would cost to get fixed?

cheers

The rookie 18 July 2007 08:29 AM

Logically I would start with an ECU reset just in case its learnt a duff setting, also remove your idle speed control valve and make sure its not clogged up with muck at all.

Simon

jaytc2003 18 July 2007 08:31 AM

reading your other post I see you have a vta dump valve, this could cause the problem you are having

johnroake 18 July 2007 07:45 PM

wat is a vta dumpvalve? the bov i have a a forge dumpvalve

johnroake 18 July 2007 11:51 PM

and how do you do an ecu reset?

bluenose2007 19 July 2007 10:02 PM

I seem to have the same prob as you on my 95. Since i got the car it idles at like 800 but when stopping it drops below 500 then recovers. Actually cut out today for the first time...

Make sure you post up if you find the problem, i'd like to know too!

P1 FEK 19 July 2007 10:34 PM

Check the inlet pipes for splits.


All times are GMT +1. The time now is 05:56 AM.


© 2024 MH Sub I, LLC dba Internet Brands