alternative to the standard turbo elbow?
 

As per title is there an alternative to the standard black plastic elbow that goes from the turbo to the maf/induction? as my dumpvalve take off has sort of seperated so its causing a bit of an air leak. :freak3:
The car is a 93wrx btw

Depends if you want to reroute breathers etc?

I did it DIY

22B Bulletin Board: A theory to help cure lift off judder caused by FMIC / MAF / recirc DV combo

If you're using the OE dumpvalve pipework I think you'll need a 19mm elbow instead of the 25mm one I used.