ScoobyNet.com - Subaru Enthusiast Forum

ScoobyNet.com - Subaru Enthusiast Forum (https://www.scoobynet.com/)
-   General Technical (https://www.scoobynet.com/general-technical-10/)
-   -   AFM life? (https://www.scoobynet.com/general-technical-10/598373-afm-life.html)

Sc0oby 13 April 2007 02:08 PM

AFM life?
 
just wondering how long would a typical afm life be? i am having problem with my check engine coming on n off on my v3 sti. code is reading 23 which is AFM. could the afm on its way out? even if the engine light came off when i connect the diagnostic it is reading the code 23 :wonder:

Jolly Green Monster 13 April 2007 04:26 PM

the MAF ( AFM ) on your car is fairly robust..

have you tried resetting the ecu? this should clear the code which is stored hence why the light is off but you still have the error code coming up.

If you reset the ecu and the error code returns then it is likely to be faulty.

Simon

Sc0oby 14 April 2007 02:03 AM

jolly: thank mate will try doing your suggestion. I am also running an emanage blue would these be sometimes the cause? The engine light will comes on once in a while but then suddenly it can disappear by itself. Would you suggest i get a replacement maf now? dont wanna risk breaking down in the middle of the road

Sc0oby 15 April 2007 03:45 PM

anyone has other comment on these issues?

Sc0oby 16 April 2007 02:31 AM

just used my sti going to work and suddenly CEL came on and halfway to work it came off. But the car was jerking madly when revs. Could this be a sign that the AFM is really on its way out?

Sc0oby 18 April 2007 01:09 PM

any1??

little rick 18 April 2007 01:44 PM

Does sound like a MAF problem

Have you managed to reset the ECU as Simon suggested?
Is the code still showing?

If it were mine I'd be taking it in to get it looked at rather than worrying about it going bang - Try to drive off boost if you have to drive the car

There's loads on here about MAF's with advice from people far wiser than me - just run a search and you'll be overloaded with usefull advice

Sc0oby 18 April 2007 02:14 PM

yes have already reset the ecu and after going for a spin the ecu is flashing the same code always


All times are GMT +1. The time now is 09:26 AM.


© 2024 MH Sub I, LLC dba Internet Brands