ScoobyNet.com - Subaru Enthusiast Forum

ScoobyNet.com - Subaru Enthusiast Forum (https://www.scoobynet.com/)
-   Interior (https://www.scoobynet.com/interior-15/)
-   -   ScanGauge (https://www.scoobynet.com/interior-15/586966-scangauge.html)

RSF Ray 27 February 2007 11:44 AM

ScanGauge
 
Well just thought I would show you this little gadget that i just received from the States.

So good in my opinion that I thought I would share it with you guys :)

You just plug it into your OBDII connector and off you go, as simple as that.

What does it do ??

Well it can give you the following 'real time' readings:

Fuel System Loop Status
Intake Air Temperature
Water Temperature
Fuel Pressure
Gallons/Litres per hour
Ignition Timing
Engine Loading
Miles/Gallon
MPH
Manifold Absolute Pressure
Throttle Position Setting
Battery Voltage

Had it going in my car and it works a treat.

The cost for this little beauty - approx $140 including shipping.

All in all with import tax if you get caught, works out at around £90 - excellent value for money.

http://i52.photobucket.com/albums/g3...n/DSC00070.jpg


http://i52.photobucket.com/albums/g3...n/DSC00068.jpg


http://i52.photobucket.com/albums/g3...n/DSC00069.jpg


You can find out more here:

ScanGaugeII - Scan Tool + Digital Gauges + Trip Computers


Thanks for looking :)

Phil 27 February 2007 04:12 PM

Looks like a good bit of kit for the price

Hungrytang 27 February 2007 04:52 PM

I quite fancy one of these...

Is Manifold Absolute Pressure the same as boost pressure??

Where did you order from??

RSF Ray 27 February 2007 05:09 PM


Originally Posted by Hungrytang (Post 6702241)
I quite fancy one of these...

Is Manifold Absolute Pressure the same as boost pressure??

Where did you order from??


I believe that Manifold Absolute Pressure does equal boost pressure.

I ordered mine direct from scangauge, phoned them up around 8.30pm which is when they are open, payed by credit card over the phone, took approx 2 weeks to get here.

No problems at all.

Love it :thumb: :thumb:

RSF Ray 27 February 2007 05:28 PM

Just made some enquries regarding boost pressure as this is what you need to do, i tried it and it seems to work.

Put it on the MAP reading.

You take your highest reading when you floor it- say 38.2

Then you take off your idle MAP reading - say 14.8

This leaves 23.4 which i believe is PSI

You can then divide this by 14.7

which equals 1.6 BAR.

Or you can go here PSI BAR Converter

It will do it for you :luxhello:

haroldhettaturbo 27 February 2007 05:33 PM

Im thinking birthday prezzi!!!

skyline gtr v 27 February 2007 05:36 PM

Hmmmmm my birthday is not till august maybe ill get the wife it for hers next month.:lol1:

Hungrytang 27 February 2007 05:48 PM

It might be worth putting a group buy together....??

RSF Ray 27 February 2007 05:51 PM


Originally Posted by Hungrytang (Post 6702502)
It might be worth putting a group buy together....??


It was one of the guys in the RS Owners Club that found this and they managed to sort out a group buy.

You still paid directly to Scangauge using either credit card or paypal, gave them the special code ;) and away you go.

So i am sure you guys could do the same :luxhello:

haroldhettaturbo 27 February 2007 06:28 PM

Groupbuy sounds good:luxhello: :luxhello: :luxhello:

Phil 27 February 2007 07:33 PM

I'd have one ;)

Hungrytang 28 February 2007 12:09 PM

See GB section.....:thumb:


All times are GMT +1. The time now is 01:45 PM.


© 2024 MH Sub I, LLC dba Internet Brands