300bhp wrx what it costs
Hello, i was wondering what it would take to get my 03 wrx to around 300bhp. Ive been told this is possible, but any more would be a bit risky without internal improvements. is this true, and what do start with.
thanks for any help. |
Possibly as much as £2000 or so, but you could do 280bhp for a lot less as you wouldn't need to change the turbo etc, etc.
For 280 bhp - decat exhaust with Sportcat in down-pipe - £500 & Remap of ECU - £600 or a bit less. |
Originally Posted by andythejock01wrx
(Post 6599255)
Possibly as much as £2000 or so, but you could do 280bhp for a lot less as you wouldn't need to change the turbo etc, etc.
For 280 bhp - decat exhaust with Sportcat in down-pipe - £500 & Remap of ECU - £600 or a bit less. I reckon you could do it for £1500 if you shop around and use group buys If you have an exhaust already then just take that off the price. Damo |
Might want to think about brakes too!
|
thanks
thanks for the info. much appreciated
|
Okay here wae go and these are the prices I should have payed on not the beg steal borrow prices.
Decat exhaust 300 TD05 20g plus equal length headers 900 RCM induction kit 350 Remap at power station 800 STI genome back box 200 Plus brakes wheels etc etc And that makes the grand total of 330BHP and 380 Nm torque, which is nice!! |
........or you could have bought an Sti to begin with :)
|
how safe is 330bhp {engine wise!?}
|
impulse buyer!
|
never did any homework at school. and i suppose im the same now
|
Originally Posted by dcrf250
(Post 6599545)
how safe is 330bhp {engine wise!?}
Many SN members have been running 350+ on std WRX internals, with hard use, for a couple of years in some cases. Check out Andy F's project WRX findings (BTW that particular car, with another owner, is now running c400bhp, 20g, and has run many 'hard' 1/4's without incident..!) . Mine has been c340x330 since June 06 without any problems...:) PS the newage gearbox is also well up to 350..!:D |
Originally Posted by Damocell
(Post 6599297)
As andy said for the 280 bhp plus a VF turbo for around £200 - £300 or a TD05FE, you may want to uprate the fuel pump as well £80. That should see you get 300 bhp possibly even more.
I reckon you could do it for £1500 if you shop around and use group buys If you have an exhaust already then just take that off the price. Damo Hence quite a big difference pricewise between 280bhp and above. Vf35 and all the mods described would amount to perhaps 340bhp. |
Originally Posted by jasonius
(Post 6599954)
Absolutely fine, as long as you take good care of it with regards to servicing etc..!;)
Many SN members have been running 350+ on std WRX internals, with hard use, for a couple of years in some cases. Check out Andy F's project WRX findings (BTW that particular car, with another owner, is now running c400bhp, 20g, and has run many 'hard' 1/4's without incident..!) . Mine has been c340x330 since June 06 without any problems...:) PS the newage gearbox is also well up to 350..!:D |
Bttt for my Q above.
|
Originally Posted by dcrf250
(Post 6599545)
how safe is 330bhp {engine wise!?}
330bhp on standard gearbox and internals My03WRX |
Originally Posted by andythejock01wrx
(Post 6600837)
Jason, how many Newage WRX owners on Scoobynet do you reckon are running, say, over 330bhp on the std gearbox ?
|
All times are GMT +1. The time now is 06:06 PM. |
© 2024 MH Sub I, LLC dba Internet Brands