Boost gauge help
Which pipe do I cut to fit the T piece for the tubing that fits to the gauge?
http://i5.photobucket.com/albums/y18...3012007061.jpg Its an MY01 WRX Bugeye Thanks Paul :) |
See the red circle over the dump valve? This be where mr T piece should be joined! :thumb:
http://i71.photobucket.com/albums/i1...ostfitting.jpg |
Originally Posted by alex_00s
(Post 6544327)
See the red circle over the dump valve? This be where mr T piece should be joined! :thumb:
http://i71.photobucket.com/albums/i1...ostfitting.jpg |
I thought you were doing your springs Paul..... mind you, it is wet!!
|
Originally Posted by RON
(Post 6544482)
I thought you were doing your springs Paul..... mind you, it is wet!!
|
Yes the tubing is going off to the left along the intercooler where it then goes (into the DEFI unit and then goes) back thru into the car and connects upto the gauge.
The T piece fits inbetween the the pipe off the dump valve. |
Thanks Alex. Did you take power through the fuse box?
|
T here
http://img.photobucket.com/albums/v6...g/Bling034.jpg, Mines powered from the stereo when I replaced that. |
:thumb: Cheers Richie, powering it from the radio will be easier for me to do I think :)
|
And here's the full effect:
http://img.photobucket.com/albums/v6...g/Bling031.jpg (Sneaky post from work whilst its still quiet:D) |
:thumb: Nice. Now get back to work :D
|
When you do this off the dump valve what size T piece did you use? i:e what size pipe is it that comes off the dump valve? i need to re-fit my boost gauge to here as i was told it is more accurate but my pipe that goes to the boost gauge is only 3mm so i,m imagining that i need a different size for the other piping
|
4mm o/d, 2.5mm i/d :)
|
http://i144.photobucket.com/albums/r...Picture006.jpg thats what you want:thumb:
|
Originally Posted by milf hunter
(Post 6624074)
http://i144.photobucket.com/albums/r...Picture006.jpg thats what you want:thumb:
|
You might get one at B&Q, Homebase, or a garden centre etc.
You could also try decent carshops, and Halfrauds. Alcazar |
hi guys im just gonna jump on and ask a quick question if thats ok,im fitting a greddy profec b spec 2 tommorrow,as long as it arrives,and i was wondering if someone could put a cirle on the engine above where i should T into the vacum line on the fuel reg?:wonder: cheers for the help,i have searched to find info on this but couldn't find any pics,thanks for the help fella's:thumb:
|
Originally Posted by colinversion8
(Post 6626109)
hi gays
|
Originally Posted by alcazar
(Post 6625817)
You might get one at B&Q, Homebase, or a garden centre etc.
You could also try decent carshops, and Halfrauds. Alcazar |
All times are GMT +1. The time now is 05:09 AM. |
© 2024 MH Sub I, LLC dba Internet Brands