Help car gone mad!!
I have made and fitted a new turbo inlet pipe and moved the breathers to a catch can so inlet only has maf and idle air feed (will upload pics when finished) problem is that the car runs fine off boost but on spool it loses power jurks spits and spluters all over the place have checked everything twice over would this be an air leak i have missed (inlet not holding charge) or could it be a maf fault from being messed with although no error code any help apreciated ?????:brickwall
|
Originally Posted by scooby dancer
I have made and fitted a new turbo inlet pipe and moved the breathers to a catch can so inlet only has maf and idle air feed (will upload pics when finished) problem is that the car runs fine off boost but on spool it loses power jurks spits and spluters all over the place have checked everything twice over would this be an air leak i have missed (inlet not holding charge) or could it be a maf fault from being messed with although no error code any help apreciated ?????:brickwall
|
Have checked everything twice over it should produce 1.1bar but once gauge goes over 0 it gets to about 2-3 psi feels like hitting a brick wall drops power / jerks all over the place but if you back off keep it off boost it drives fine afr is a bit rich so think its a pre turbo air leak or a dodgy maf or worst case turbo.
any one help with this please????? |
Originally Posted by neonfury
have you got a boost gauge? If so, what psi/bar are you producing? Sounds like you are over boosting etc. back track on what you've done and have another look. Its really easy to rip stuff apart and put in new mods without realising what you've actually done ;-) believe me I always do it! :wonder:
|
bttt any help on this???
|
All times are GMT +1. The time now is 03:42 PM. |
© 2024 MH Sub I, LLC dba Internet Brands