ScoobyNet.com - Subaru Enthusiast Forum

ScoobyNet.com - Subaru Enthusiast Forum (https://www.scoobynet.com/)
-   Drivetrain (https://www.scoobynet.com/drivetrain-11/)
-   -   clutch is slipping (https://www.scoobynet.com/drivetrain-11/501781-clutch-is-slipping.html)

wrx_ra 22 March 2006 01:54 PM

clutch is slipping
 
hi all, clutch has started slipin' on boost, take its time for a new one

jd5217 22 March 2006 01:55 PM

look in group buys, there are group buys going on the exedy organic clutch kits from API.

wrx_ra 22 March 2006 02:15 PM

cheers bud, will check it out

minty 28 March 2006 11:29 PM

I have got an MTR clutch and a Toda flywheel that i purchased for my RA but have now changed the engine plans and i'm selling them if your interested at all. Let me know Thanks Chris.

APIDavid 29 March 2006 08:29 AM

The Group buy on the Exedy Performance clutch closes at 5.00 pm Friday 31st March.

David APi Impreza / APi Engines
www.apiengines.com

RobEvo5 29 March 2006 11:05 AM

If it helps in your decision - The Exedy from API is a good clutch and can hold the power. I am running dyno proven 360ft/lb+ torque and the clutch was holding so well it even stripped the 3rd gear on my box only last week.

APIDavid 29 March 2006 11:13 AM


Originally Posted by RobEvo5
If it helps in your decision - The Exedy from API is a good clutch and can hold the power. I am running dyno proven 360ft/lb+ torque and the clutch was holding so well it even stripped the 3rd gear on my box only last week.

Please sir, Please sir, We do gearboxes:D

David APi

RobEvo5 29 March 2006 12:01 PM


Originally Posted by APIDavid
Please sir, Please sir, We do gearboxes:D

David APi

We have already had email dialog ;) I was very tempted with one of your hybrid STI5 5 speeders to mate up to my UK diff, but went for a second hand hybrid type R box in the end. If I hadn't already commited to the type R box, I would have probably come your way. But if the type R box gives way I will come talk to you with regards a 6 speeder.

APIDavid 29 March 2006 12:07 PM


Originally Posted by RobEvo5
We have already had email dialog ;) I was very tempted with one of your hybrid STI5 5 speeders to mate up to my UK diff, but went for a second hand hybrid type R box in the end. If I hadn't already commited to the type R box, I would have probably come your way. But if the type R box gives way I will come talk to you with regards a 6 speeder.

Thats the sort of conversation I like :D

David APi

MrReee 29 March 2006 12:36 PM


Originally Posted by RobEvo5
If it helps in your decision - The Exedy from API is a good clutch and can hold the power. I am running dyno proven 360ft/lb+ torque and the clutch was holding so well it even stripped the 3rd gear on my box only last week.

I'd rather lose my clutch than my gearbox :cuckoo:

MrReee

rigga 29 March 2006 12:52 PM

at 360ft/lb either may go........

RobEvo5 29 March 2006 01:01 PM


Originally Posted by MrReee
I'd rather lose my clutch than my gearbox :cuckoo:

MrReee

So would I............ But I also want as much power from my car as possible. The clutch that was in it before the Exedy was slipping badly in 3rd,4th and 5th causing major loss of power and fueling all over the place. Clutch slipping was probably saving the box, But I knew that and knew I was on borrowed time once a decent clutch went in. Just shame it didn't hang on a bit longer than it did.

360ft/lb is excessive and would have eventually broke a UK standard box. I doubt WRX-RA would be as unlucky as me, and if he put a higher spec clutch in, at least he will have the comfort of knowing it will hold the power if he ever adds to the modifications. And from my experience you can never say never when it comes to modding.;)

wrx_ra 03 April 2006 09:31 AM

thanks all, got new excedy clutch fitted


All times are GMT +1. The time now is 10:23 AM.


© 2024 MH Sub I, LLC dba Internet Brands