Corsa spacers???
 

Bought a set of subaru spacers to fit my new Infinity speakers and guess what..they don't fit..Speakers 165mm Subaru spacers 130mm.

So decided to get some for a Corsa to try as they were 165mm.
Anybody else used these spacers before....????

I know i will have to adapt them slightly, just wondered if anyone else has had the same problem.
Thought about MDF but my DIY skills are abit pants..

try searching the ICE forum using the keyword "corsa". Sure you'll find one or two posts on the matter. !

Rich

I used Corsa spacers on my MY06 to fit some 165mm speakers. I just had to saw off a locating lug on the back (10secs work).

It aligned fine on the bottom two original screw points, but I needed to drill a hole in the spacer a couple of mm down at the top to pick up on the top original mounting of the door. Very easy and I'm far from Mr DIY when it comes to drilling holes etc. :)

Out of interest how much were the subaru 130mm spacers... i need some of those :)

Tony.

Tony ..they were about £14 from Halfrauds.

Thanks for the replies guys.

Cheers.

Tony.

I couldnt find 165mm Corsa spacers only 130mm so picked up the 165mm Astra/Vectra ones.

Will these be same?

Were these the autoleads one's?

These ones?

http://www.lowcostcaraudio.co.uk/sho...ZproductJJ1317

Yes they were m8.......

Anyone used these in a Classic yet ????
If so ..how did you get on ?? As i am having a bit of trouble with the Corsa ones

Cheers

you can use the astra/vectra ones in classics, if they dont fit the original holes exact its not a problem just twist the adaptor slightly and drill new ones so that it does fit. another tip is to fill the edge of the adaptor with fibreglass so it makes a more solid base for the speaker to work in, the plastic is a bit too flimsy and reinforcing it will help with SQ. use sound deadening as well on the doors.

These are actually only 130mm but it says 165mm...:Suspiciou