ScoobyNet.com - Subaru Enthusiast Forum

ScoobyNet.com - Subaru Enthusiast Forum (https://www.scoobynet.com/)
-   General Technical (https://www.scoobynet.com/general-technical-10/)
-   -   Dipstick reading-over full why? (https://www.scoobynet.com/general-technical-10/491510-dipstick-reading-over-full-why.html)

speedy1 10 February 2006 07:54 PM

Dipstick reading-over full why?
 
On a classic, why does the oil read way above the max level. Ive been told they all do it, why.... Ive had an oil change and put in exactly 4.5ltrs, it still reads way above the max level:freak3:

Floyd 10 February 2006 08:21 PM

It shouldn't do! Perhaps there was residual oil left in after the change? Did you measure the oil with the car level?

F

GrahamG 10 February 2006 08:52 PM

i have this same problem. just generally hard to get a good reading. I was told to blow down there first. lol.. not tried it yet...

LB4 10 February 2006 09:31 PM

I have found the best way is to pull the dip stick out, wipe it, and leave it out for 5 mins to let the oil that was dragged up the tube run back out.
You should then get a clear indication.

Gary

GrahamG 10 February 2006 09:33 PM


Originally Posted by LB4
I have found the best way is to pull the dip stick out, wipe it, and leave it out for 5 mins to let the oil that was dragged up the tube run back out.
You should then get a clear indication.

Gary

Nice! wil try that! :D

zedf 11 February 2006 11:36 PM

the car has to be perfectly flat even if its alittle bent it will give you the wrong reading it happened to me i checked it and it showed empty i think moved the car and it showed the right amount its weird.

GrahamG 12 February 2006 02:04 PM


Originally Posted by LB4
I have found the best way is to pull the dip stick out, wipe it, and leave it out for 5 mins to let the oil that was dragged up the tube run back out.
You should then get a clear indication.

Gary

Spot on Gary.:thumb:

Cheers!

G.


All times are GMT +1. The time now is 02:32 AM.


© 2024 MH Sub I, LLC dba Internet Brands