ScoobyNet.com - Subaru Enthusiast Forum

ScoobyNet.com - Subaru Enthusiast Forum (https://www.scoobynet.com/)
-   ScoobyNet General (https://www.scoobynet.com/scoobynet-general-1/)
-   -   uk wrx remapped..how noticable is difference (https://www.scoobynet.com/scoobynet-general-1/487314-uk-wrx-remapped-how-noticable-is-difference.html)

trogs109 26 January 2006 11:10 PM

uk wrx remapped..how noticable is difference
 
hi all
as above really, standard bugeye. what do you need to go with a remap to get the most out of it, and is there a great difference.

thanks

stevebt 26 January 2006 11:13 PM

just add a a full decat and a panel filter and you will see some cracking improvements :)

Dave uk blue mica 26 January 2006 11:15 PM

with a full decat and a panel filter a remap should give you around a 70bhp increase

stevebt 26 January 2006 11:43 PM


Originally Posted by Dave uk blue mica
with a full decat and a panel filter a remap should give you around a 70bhp increase


and since dave maps cars you know he makes sense ;):D

trogs109 27 January 2006 10:08 AM

thanks for this fellas, sounds good. But how do you get through MOT

alloy 27 January 2006 10:17 AM

Decat and remap :thumb:

MOT time, you can swap the decat for your original exhaust and then switch it back, or keep your eyes peeled for a performance friendly garage ;) they are out there!

woolz 27 January 2006 10:44 AM

once the car is remaped for the decat wont the ecu going all funny if you then swapped the orignal zorst back on for the mot?

alloy 27 January 2006 10:48 AM


Originally Posted by woolz
once the car is remaped for the decat wont the ecu going all funny if you then swapped the orignal zorst back on for the mot?

It will affect it, but your not going to be running the car for more than a few hours with the standard exhaust on, you just use it top pass your mot and then switch it back after. Not that I would do this Mr BTP :Suspiciou but from what i have heard ;) :D

woolz 27 January 2006 10:51 AM

cool thanks! one more quick question about a decat... if you dont have an after market zorst does it sound very loud having just a decat?

alloy 27 January 2006 10:57 AM


Originally Posted by woolz
cool thanks! one more quick question about a decat... if you dont have an after market zorst does it sound very loud having just a decat?

Not quite sure what you mean :wonder: . The decat will increase the noise levels, most people generally do a decat downpipe and centre section with a back box on the end. 2.5" is good for applications up to 350hp-ish and then a 3" system for power applications up and beyond that :thumb:

woolz 27 January 2006 11:02 AM

i mean if you keep the standard zorst and just have a decat will it increase my noise?

alloy 27 January 2006 11:13 AM

yes

Mjb1957 27 January 2006 11:25 AM

I have a 2005 wrx, will a full decat and a panel filter increase my power output.
I currently have a K&N filter at the moment .

justanotherperson 27 January 2006 11:59 AM

If i put a green panel filter in my bugeye02 will it need a remap?

and what *roughly*will a sportcat and panel filter get me in bhp increase?

WELBY 27 January 2006 06:28 PM

I had just the centre cat removed and a TEK 3 re-map on my bugeye, this has made a noticable difference..
its gone from 215 up to 260bhp..


And it still passes the mot :D

New_scooby_04 27 January 2006 06:40 PM


Originally Posted by justanotherperson
If i put a green panel filter in my bugeye02 will it need a remap?

and what *roughly*will a sportcat and panel filter get me in bhp increase?

No.

I believe If you sports cat the DP and decat the rest, you should be looking at around 270 mark, maybe more, pretty soon after the TD04 becomes a limiting factor.

Ns04

Trap2Terrorist 27 January 2006 07:00 PM

I've got an MY01 bugeye WRX.

With a decat centre pipe, (leaving the up and down pipes in), Magnex backbox and a GREEN panel filter I was getting 222bhp, an increase of 7bhp from standard.

An ecutek remap then pushed this up to 265bhp and 258lb/ft torque. :thumb:

I have also had my fuel pump changed as well but you could argue for or against needing to do this....and of course it doesn't increase your bhp.

Note: If you are putting in a decat downpipe on a newage, you should also put in a decat up pipe. Someone will probably come along shortly and give you the technical reasons for needing to do this. :cool:

Ben v7 27 January 2006 07:21 PM


Originally Posted by Trap2Terrorist
I've got an MY01 bugeye WRX.

With a decat centre pipe, (leaving the up and down pipes in), Magnex backbox and a GREEN panel filter I was getting 222bhp, an increase of 7bhp from standard.

An ecutek remap then pushed this up to 265bhp and 258lb/ft torque. :thumb:

I have also had my fuel pump changed as well but you could argue for or against needing to do this....and of course it doesn't increase your bhp.

Note: If you are putting in a decat downpipe on a newage, you should also put in a decat up pipe. Someone will probably come along shortly and give you the technical reasons for needing to do this. :cool:

How was your fuel economy affected in the end. You were worried it was running rich and then you took it back if I remember correctly?

Trap2Terrorist 27 January 2006 07:42 PM


Originally Posted by Ben v7
How was your fuel economy affected in the end. You were worried it was running rich and then you took it back if I remember correctly?

It isn't running excessively rich (at least not when it was back on the rollers) but it is still using shed loads of fuel. I'm not getting more than 21mpg's on a normal weekly work run that used to give me 26mpg's. I suppose if you want STi fuel speed you'll get STi fuel economy. :wonder:

I'm going to buy an air/fuel gauge though to see if it give me any useful info (and it'll look good in the centre pod ;) )

Ben v7 27 January 2006 07:44 PM


Originally Posted by Trap2Terrorist
It isn't running excessively rich (at least not when it was back on the rollers) but it is still using shed loads of fuel. I'm not getting more than 21mpg's on a normal weekly work run that used to give me 26mpg's. I suppose if you want STi fuel speed you'll get STi fuel economy. :wonder:

I'm going to buy an air/fuel gauge though to see if it give me any useful info (and it'll look good in the centre pod ;) )

Just strange that. I have always been under the impression that a remapped car would be more fuel efficient. Have you been using the power more since it's been mapped?

Mines being fitted with a sports-cat downpipe, de-cat up-pipe and then remap. I do quite a few miles so hope I am still going to be able to get 30mpg on A-road and motorway cruises.

mgcvk 27 January 2006 07:58 PM

My car is much more fuel efficient post decat. Obviously this is with gentle speed limit driving such as on the motorway or just keeping the revs down. If you boot the car around the back roads you can watch the fuel gauge drop.
I can get 34mpg no probs on long journeys driving like a pussy.

Trap2Terrorist 27 January 2006 08:00 PM

Driving like a pussy I get nowhere near 30mpg's. I reckon I could squeeze 22 or 23mpg's at a push :(

Ben v7 27 January 2006 08:09 PM


Originally Posted by mgcvk
My car is much more fuel efficient post decat. Obviously this is with gentle speed limit driving such as on the motorway or just keeping the revs down. If you boot the car around the back roads you can watch the fuel gauge drop.
I can get 34mpg no probs on long journeys driving like a pussy.

Thats what I wanted to hear. I am happy to sit at 70mph on the motorway and currently get about 30mpg doing that so if I gain another couple of mpg with the de-cat (centre went long ago) and remap then I'll be happy. Fuel savings over life of ownership will justify the remap cost - that's what I tell myself anyway. ;)

Trap2 - bizzare that your car is guzzling so much juice even when driving it gently. I'll see what mine does when it's done as same variant and will have the same mods bar the sports cat downpipe and up-pipe. Will probably be using the same mappers that you did too.

funkyspider 27 January 2006 08:42 PM

I have just had a 2001 bugeye remapped and the increase in midrange is very noticable, now pushing 265+ with K&N and a decat.

I was just wondering about fuel after a remap.
It was remapped with Optimax in, but depending where I am I dont always know where to get Optimax.

Will it do any damage if I stick a tank of Superplus in every now and then ?

Cheers
Martin.

New_scooby_04 27 January 2006 09:05 PM


Originally Posted by funkyspider
I have just had a 2001 bugeye remapped and the increase in midrange is very noticable, now pushing 265+ with K&N and a decat.

I was just wondering about fuel after a remap.
It was remapped with Optimax in, but depending where I am I dont always know where to get Optimax.

Will it do any damage if I stick a tank of Superplus in every now and then ?

Cheers
Martin.

Ideally, you really need to run the car on the octane petrol it was mapped for mate. You'll want to get a K(C)nock Link to keep an eye on things, this will tell you if the feul you've put in isnt good enough.

Ns04

justanotherperson 27 January 2006 09:11 PM

Ok im a bit new to Scooby tunning and it probably shows:wonder: ,so it's obviouse where the center section of an exhaust is,the downpipe is off the turbo manifold i take it,but where the hell is the up pipe:wonder: and there is 3 cats on a bugeye ??? even on a modern car 3:cuckoo:

The Trooper 1815 27 January 2006 09:14 PM


Originally Posted by trogs109
hi all
as above really, standard bugeye. what do you need to go with a remap to get the most out of it, and is there a great difference.

thanks

YHPM trogs:thumb:

The Trooper 1815 27 January 2006 09:20 PM

I have an MY01 UK WRX Impreza. Me and Trap2 went for a remap at the same time. When I got there I was getting a ****ty 208 BHP!!!
I have a Ecutek Remap by Powerstation £499 +VAT. I changed the panel filter for an HKS Green Foam Hybrid (not oiled) £34, I have a WR sport Backbox that came with the car but still have all the cats in place. No MOT problems. As a recommendation of Rich at Powerstation I fitted a Walbro 225 fuel pump, £80 second hand. I run it on Tesco 97 RON all the time.

262.5 BHP.
343 Nm Torque.

It now spools up quicker, is punchy as fcuk in the mid range and scares the bejesus out of and does pull away from Boxsters. 0-60 is now a whisker over 5 secs:)

STi figures for less than £800:thumb:

Go figure.

If you want I can e-mail the graphs from Powerstation too.

Ben v7 27 January 2006 09:29 PM


Originally Posted by New_scooby_04
Ideally, you really need to run the car on the octane petrol it was mapped for mate. You'll want to get a K(C)nock Link to keep an eye on things, this will tell you if the feul you've put in isnt good enough.

Ns04

Can't the new age ECU's cope with this? I understand knock links are needed on the classics but the New Age ECU will retard timing automatically if it detects det (lower octane fuel) - which makes a knock link more or less redundant. I'm not bothering with one on mine.

Ben

mgcvk 28 January 2006 09:30 AM


Originally Posted by mgcvk
My car is much more fuel efficient post decat. Obviously this is with gentle speed limit driving such as on the motorway or just keeping the revs down. If you boot the car around the back roads you can watch the fuel gauge drop.
I can get 34mpg no probs on long journeys driving like a pussy.

Sitting down and working it out with proper decimal points etc I'm actually getting more like 29.9999 - 30.122 mpg on long hauls. Still not too bad and better post remap.
:)


All times are GMT +1. The time now is 06:56 AM.


© 2024 MH Sub I, LLC dba Internet Brands