ScoobyNet.com - Subaru Enthusiast Forum

ScoobyNet.com - Subaru Enthusiast Forum (https://www.scoobynet.com/)
-   General Technical (https://www.scoobynet.com/general-technical-10/)
-   -   walbro 255lph (https://www.scoobynet.com/general-technical-10/478459-walbro-255lph.html)

rexabusa 20 December 2005 08:58 PM

walbro 255lph
 
can anyone tell me if i need to uprate fuel pressure regulator after fitting walbro to standard jap wrx.also does running rich harm engine
thanks

scooby_mania_yeah 22 December 2005 10:36 AM

If your gonna fit an upgraded fuel pump then you should get a remap.. To level out the amount of fuel....#
#
Ecutek 3 . Ecutek 2 . Power fc depending on your car

New_scooby_04 22 December 2005 10:48 AM


Originally Posted by rexabusa
can anyone tell me if i need to uprate fuel pressure regulator after fitting walbro to standard jap wrx.also does running rich harm engine
thanks

Asked about this myself recently, apparently the std reg is fine with the Walbro 255l. People usually uprate the fuel pump to prevent the std one from struggling after a remap. Scoobies run rich as standard and if I understand it correctly, it's your ECU that makes the requests of the fuel pump- its not the case that just cause you fit an uprated pump, it'll flow more fuel all the time.

Ask an expert though to be sure! :)

Ns04

fireblade37 22 December 2005 10:54 AM

I ran a walbro 255 for 16 months until i recently got round to a tek3
I did'nt have any probs.


All times are GMT +1. The time now is 04:33 AM.


© 2024 MH Sub I, LLC dba Internet Brands