Stoke September Convoy to Derby.
 

Yo all, I'm away for the next few weekends so wondered if we're gonna go over to the Midlands meet on first Sunday of september.

Meet at Tescos Meir Park at 11:45 for 12:00 departure?

Anyone fancy this?

1) Skoosh.
2) ........?

C ya in a few weeks when wagon's fixed;)

Si

Sounds good

1) Skoosh.
2) assti

Sorry mate, on the first sunday in september (4TH) I'm at Trax on SIDC stand...

I'm up for it, so long as the car is back in one piece by then! Just re-fitted the headers and up-pipe, now got to drop the new turbo on.

Should there be oil dripping out of the bottom of the turbo where the impeller(?) blades are (the exit end)? I think it has a seal must have gone on the old one! Maybe that's why I was getting a bit of smoke when I wellied it.

1) Skoosh.
2) assti
3) speedydaveb
4)

p.s. If anyone wants a Magnex up-pipe I have one for sale (50mm approx at the header end and 48mm at the turbo end). It's wrapped and sprayed silver, though I could spray it black if it's going onto a 'stealth' car! :lol1:

Defo up for this as I'm in the studio hopefully on 11th Sept.

Si.

I'll be up for this one defo count me in....

1) Skoosh.
2) assti
3) speedydaveb
4) Big scoob
5)

1) Skoosh.
2) assti
3) speedydaveb
4) Big scoob
5)scoobyroo² aka halford aka lee aka t**t

Sounds good lads will book the time off work :idea:
lee

Can't make this one lads.We've just booked up for a week all inclusive in Gran canaria. Have a good one and take it nice and easy.
1) Skoosh
2) speedydaveb
3) Big scoob
4)scoobyroo² aka halford aka lee aka t**t

Hope you 2 have a good one and make sure you bring some sun back with you see ya at the next meet..

Reno, Danny, Andy, are you up for this guys?

SI.

yes me will be attending:)

I need a MAF sensor with a green dot on it (for a UK spec MY00 turbo 2000), if I can't get one I won't be attending. Anyone got one they can sell me!?

lo all.
works been a bit hectik of late, got my fogs but havn't had time to fit em yet
so sunday is a maybee i'm affraid probably wont no till sat pm so i will give Si a ring if im attending

could do with a day out
so c u soon. If i dont make it have good run

steve

There may be trouble ahead.....
 

:cry: may not be attending......rang Ian for a progress check on car after new head gasket, all engine seals and cambelt replacement, and, .........
car's still leaking from somewhere near water pump housing, not a seal, gasket or pipe and 3" away from cylinder heads.

Ian's stumped and restripping engine as we speak.

I'll keep you posted.

Si.

That is bad news, cracked or porous head maybe? I know Vauxhall had a problem with that. E30 BMW's (that I had) were notorious for cracking heads.
Hopefully it's nothing too serious/expensive.

Mine still isn't back on the road either, though I have a MAF on the way to me in the post. Hopefully this will cure mine.

p.s. I now have some STi rear spoilers for my wagon, they're not fitted though yet! :)

Sorry all i wont be attending 2 got to cover a shift weekend but hope you
all have a good run
lee

WooHoo, will defo be there boys, car back on road again after all the engine stuff fitted PLUS new water pump.

Si.

Looks like it could be just the 5 of us:

Skoosh
Danny
Reno
Bigscoob and
Speedydave.

C ya @ 11:30

At this rate there might just be Big scoob and Danny going as Si and myself are still off the road! :Whatever_

Just got a PM saying my MAF sensor has been despatched so it's still hopefull that I'll be there!

Si beat me to the post, first time for everything! :lol1:

Glad to hear it's back in one piece, I used to have problems with the water pumps on my old RWD escorts, though that could have been down to the corn flakes packets I used for gaskets!!!!

Have you heard from Andy then Si?

Well the replacement MAF has cured the tickover problem and reading the CEL everything is ok. Problem is I still have this 'kangaroo boost' problem still. Si says to clean the boost solenoid - first I need to find out where that is!! :confused:

it should be on the side of your front passenger side wheel strut.
really easy job to do,took me about an hour,cured the problem for me:)

Could we do another mid week meet so Si-Danny could show us how to do the
boost solenoid cleaning over a nice cold pint and a chat
I know you did show me but......... im cant rember how:idea:

Have a good run weekend all

glad to here the wagon done si
hope you sort your's speedydave

Lee

I think I have found out where it is and wil clean it later when the engine has cooled enough to touch it!

Got a bit lost in Hanley looking for Newcastle Subaru this afternoon! :)
After all that they didn't have any the bits I wanted in stock.
For them to hook mine up to a laptop and diagnose it they wanted £50+VAT which I would have to book it in for. Going to try out a few more things this weekend before doing that.

I'll be there on Sunday, but don't expect me to be driving on boost!! :(

I've got my car fixed!!!! :luxhello: :luxhello: :luxhello: :luxhello: :luxhello:

Took the intercooler off, and cleaned all the pipes (there was some oil residue next to the pipe on the O/S) checked for cracks and re-tightened the jubilee clips. Removed the clip that goes around the pipe leading to the turbo and re-tightened that then using an airline blew through most of the small pipes leading to the boost solenoid and inlet manifold. When doing that there was a 'clunk' and then you could hear air escaping somewhere.

Also took off the I/C tilt kit as it looked as if the jubilee clip was not seated right because of the revised angle of the I/C. It could have just been that.

So, no idea really what it was, one or a combination of the above, but fiddling with stuff, taking it apart, cleaning it and replacing it it is now fixed. Well chuffed!! :)

Took it for a spirited drive and it is better than ever, but compared to the push bike I have been using the last few weeks anything would seem quick! :D

See you tomorrow in Derby, I'm staying in Alverston tonight and will meet you at the pub tomorrow afternoon.

I'm still losing fluid......................damn pissed off too....!

Not enough to deter me from tomorrow though;)

C ya at tescos at 11:30am

Si.

ps:think leak is radiator related.

see you all down tesco's tomorrow 11.30 :)

Speedydave is that a make it you own i/c spray m8
or was it all ready no the motor????
anyone got an idear to make one would be intreasted to give it ago
lee

It's a tilt kit I just put on, I haven't got I/C spray. Have a look at the thread here if you want to have a go at making one yourself:
http://bbs.scoobynet.co.uk/showthread.php?t=401881
There are probably other threads on this subject elsewhere on SN, this is the one I bookmarked when I was thinking of making one myself.

Car is playing up again, got the bonnet open waiting for it to cool down then will clean all the pipes out properly this time.

It was a good meet at the Clock Warehouse, some nice cars there which I haven't seen before. It was a shame the 200BHP+ club didn't happen or we were too late for it. Si got us lost again on the way! :)

Got lost..........and..........managed to lose my windscreen trim too on A50 sub-supersonic;)

Top trim from around windscreen, heard it come off too, didn't realise what it was at the time......wonder how much that will cost?

Good meet guys, those 2 Ferrari's sounded awesome aswell, fair play to you John for havin' a go too.

Any pics anyone?

Si.

Nice meet folks, glad you enjoyed it :)

Found a website for the other meet over at stenson, turns out it's next weekend if you fancy a trip over.clicky
Should be up on the events list :)

Dave