Sti 3 Clutch
My clutch was slipping in 5th when I bought the car, after a week of fun it's now slipping in 4th and 5th, so Im guessing it won't be long before the other 3 gears start slipping.
So... How much am I looking at to replace the clutch, parts and average labour costs, inc VAT ? Also what spec am I looking for, the car is std, apart from filter and zaust. Cheers in advance |
I have the same base spec car.
Change that clutch before the flywheel is done for... I now have an AP Organic clutch with 407 x 350 engine, raced regularly, and road driven too. Clutch is realy nice and very OE in feel. If you are staying stock on the engine, the Sti clutch is rather good too! Be warned, a bitch of a job. Clutch = £350 ish Labour about £200/300 if they have to fight the box coming off. Graham. |
ok, had a quote of £150 to fit the clutch, so now I need to know where to get a clutch from and what type I should go for.
Cheers |
blimey - that's cheap!
|
Originally Posted by TopBanana
blimey - that's cheap!
|
You can get an AP from all the decent specialist suppliers, or call AP and ask for the nearest one to the (very cheap) garage. What a bargain!
|
will a 96 sti use a 225mm or 230mm clutch ?
|
OR you could join the group buy for an Exedy Performance Organic at APi Engines. 3 part clutch that takes 400 hp at £250.00 and an exchange lightened flywheel [7Kg] at £120.00.
There's one happening now on the group buy forum. Call us on 01926 614333 if you want in. David APi Engines / APi Impreza www.apiengines.com |
Originally Posted by APIDavid
OR you could join the group buy for an Exedy Performance Organic at APi Engines. 3 part clutch that takes 400 hp at £250.00 and an exchange lightened flywheel [7Kg] at £120.00.
There's one happening now on the group buy forum. Call us on 01926 614333 if you want in. David APi Engines / APi Impreza www.apiengines.com Sounds interesting :D Whats the score with the flywheel ? I mean what benifits does it give over the std sti flywheel ? |
By lightening the flywheel you reduce the weight of the rotating parts of the engine - by 5Kg in our case. When it weighs less, it takes less effort to move it, so the engine spins free-er. It helps the spool up of the turbo and thus you get punch from lower down the rev band.
Good cheap mod that actually shows a benefit. ALSO, it is likely that your flywheel has cracks in it [ from the slipping and general wear ] and you will have to do something about it anyway. Makes sense to improve it at no extra cost - in real terms. David APi www.apiengines.com |
sounds good, but it's gonna cost me a fair amount of cash, £250 + £120 + £150 fitting, and I assume your parts are + Vat aswell ?
|
Originally Posted by cossie01
sounds good, but it's gonna cost me a fair amount of cash, £250 + £120 + £150 fitting, and I assume your parts are + Vat aswell ?
You'll get clutches offered at less than £100 on here GOOD LUCK ! David APi |
nah I do want a good clutch as I don't wanna be replacing it again in a few months, im just wondering about the flywheel aswell now.
Is this a 230mm clutch or a 225mm clutch and is there any warranty with it ? |
It's a 230mm and the warranty is 12 months no quibble.
David Api PS signing off till Friday now.
Originally Posted by cossie01
nah I do want a good clutch as I don't wanna be replacing it again in a few months, im just wondering about the flywheel aswell now.
Is this a 230mm clutch or a 225mm clutch and is there any warranty with it ? |
Cossie:
You won't go wrong with API, David is a top guy. Use him if you can. Flywheel is tempting.... Graham :D |
Originally Posted by 911
Cossie:
You won't go wrong with API, David is a top guy. Use him if you can. Flywheel is tempting.... Graham :D Thanks mate, appreciate the plug. David APi www.apiengines.com |
Originally Posted by 911
Cossie:
You won't go wrong with API, David is a top guy. Use him if you can. Flywheel is tempting.... Graham :D Shame, I don't drink coffee so no use for a cappuccino machine :D Gerry |
All times are GMT +1. The time now is 01:07 AM. |
© 2024 MH Sub I, LLC dba Internet Brands