ScoobyNet.com - Subaru Enthusiast Forum

ScoobyNet.com - Subaru Enthusiast Forum (https://www.scoobynet.com/)
-   Interior (https://www.scoobynet.com/interior-15/)
-   -   Air Vents broken (https://www.scoobynet.com/interior-15/425391-air-vents-broken.html)

jowl 08 May 2005 03:07 PM

Air Vents broken
 
I broken the vertical bits in one of the air Vents in the middle of the dash.

How do I get the whole unit out to try and repair them. Was trying to take a phone holder out to put in PDA/Sat Nav holder.

alcazar 08 May 2005 07:34 PM

Classic? Remove oddment tray and vents will come out easily.

Alcazar

jowl 08 May 2005 07:54 PM

Sorry, yes 97 Turbo! - forgot to mention that!

Oddment Tray?

alcazar 09 May 2005 02:36 PM


Originally Posted by jowl
Sorry, yes 97 Turbo! - forgot to mention that!

Oddment Tray?

Does it not have the thingy on top of the dash, with an opening lid for oddments?

If not, then sorry, I dunno.

Alcazar

SCOOBY TOWERS 09 May 2005 03:19 PM

I've got a set of fins from a vent I took apart to mount my knocklink in.
Also got the outcase that won't hold the fins but will hold a knocklink.

Shout if either are any use.
Chris

SCOOBY TOWERS 09 May 2005 03:22 PM

P.s. It may not be broken !
They are clipped together and some times the holding bar at the back just falls out. It may be possible to click it all back together once removed.
Not done a 97 but if you send me pics I maybe able to talk / type you through it.

Chris

jowl 09 May 2005 04:56 PM

Cheers Scooby Towers!

I will take some pics but will probably be a couple of days or so (suddenly very busy...bloody computers!)

I think the vent is repairable...but I'll see what you think!

SCOOBY TOWERS 11 May 2005 10:07 AM

No worries - e mail me when your ready.

jowl 14 May 2005 06:25 PM

Fixed it!

Managed to snap the vertical 'bars' back in to line with the help of some tweasers!

And now decided on a suction-mount rather than vent mount for PDA / Sat Nav system :)

Thanks for the offer of help though!

SCOOBY TOWERS 17 May 2005 12:03 PM

No worries - glad you got it sorted :)

doug2507 25 July 2005 08:35 PM

I know this is an old thread but i have the same problem on a ver.6. There are two screws hidden by plastic covers inside the oddments tray which i have removed but it seems it doesnt want to come off. Is there something im missing here? Theres nothing else obvious holding it down and i dont want to break it!

Regards,
Doug.

SCOOBY TOWERS 26 July 2005 07:45 AM

No worries Doug.
Once the two screws are out (the ones behind the little plastic covers) then its a case of no guts, no glory.
The top box, vent surrounds and air vents all come out as one unit.
Simply grab the little lock bar (that the top lid locks to) and pull the whole unit towards the rear of the car.
Don't try lifting it - just pull backwards.
The unit is held in with lugs and you may feel your about to break something, but it will go if your persistant ( a waggle sometimes helps).

If your to worried about breaking something, and your near Lancashire, give me a shout and I'll happilly do it for you.

Chris.
P.s. If you do bust anything, shout - I've a spare unit in the loft.

doug2507 26 July 2005 08:42 AM

Cheers for your help Chris.

On holiday so still sitting at the table munching down a bit of toast and a cup of tea. Need some nourishment before attacking the dash!;) I'll ley you know how i get on.

Regards,
Doug.

SCOOBY TOWERS 26 July 2005 09:23 AM

Breakfast followed by a pull - your deffinatley on holiday ;) :D


All times are GMT +1. The time now is 11:19 AM.


© 2024 MH Sub I, LLC dba Internet Brands