Latest problem, how to get block split apart?
all 16 bolts are out, just the sealant holding it together,
any tips? robert |
any tips? |
Originally Posted by David_Wallis
Dont eat yellow snow.
Mind the Gap :) |
very good,
any useful tips? |
I cant remember how many bolts there are.. you removed the oil pump etc ??
if not prybar / hammer time. :O ;) :D |
all 16 bolts off, and all ancillaries removed, just very strong sealant :(
|
any body?
|
bttt
|
soft faced, dead-blow hammer and give it a belt!If you pry just be careful not to damage any surfaces
|
been belting for a few days now with no success :(
|
Originally Posted by robertgraham
been belting for a few days now with no success :(
|
erm that was`nt in my copy of the workshop manual, could you elaborate pleas? :?
Originally Posted by washer
have you removed the two curclips and knocked the two pins out :idea:
|
http://206.13.93.15/STi_Stuff/STi_Manual/02.%20ENGINE%20SECTION%20(STi)/04.%20MECHANICAL/20.%20Cylinder%20Block.pdf
|
All times are GMT +1. The time now is 02:40 AM. |
© 2024 MH Sub I, LLC dba Internet Brands