ScoobyNet.com - Subaru Enthusiast Forum

ScoobyNet.com - Subaru Enthusiast Forum (https://www.scoobynet.com/)
-   Drivetrain (https://www.scoobynet.com/drivetrain-11/)
-   -   BHP at wheels? (https://www.scoobynet.com/drivetrain-11/411054-bhp-at-wheels.html)

STi Blues 14 March 2005 05:28 PM

BHP at wheels?
 
What does 210BHP at wheels equate to at the flywheel on a 03 WRX? Can torque figures also be taken at the wheels as opposed to flywheel?

STi Blues 15 March 2005 12:19 PM

Think I have cracked it - my best mate told me that to calculate flywheel HP on a scoob you multiply wheel HP by 1.7571 - therefore my WRX 03 is making a heft 369bhp at flywheel. Wow!!!! Only mod I have got is a Genome Sti back box - I,m chuffed to bits - what mod next I wonder - guess an air filter should get me over the 400 mark - TOTBIV here I come - be ready! :norty:

Graz 15 March 2005 12:22 PM

I take it it's a JDM WRX you have? 369 bhp is still rather a lot though, think your calculation might be wrong :confused:

punkie 15 March 2005 12:23 PM


Originally Posted by STi Blues
Think I have cracked it - my best mate told me that to calculate flywheel HP on a scoob you multiply wheel HP by 1.7571 - therefore my WRX 03 is making a heft 369bhp at flywheel. Wow!!!! Only mod I have got is a Genome Sti back box - I,m chuffed to bits - what mod next I wonder - guess an air filter should get me over the 400 mark - TOTBIV here I come - be ready! :norty:

So your loosing 159 bhp through your transmission !!

I'd get your mate to re calculate if i were you :cuckoo:

Dracoro 15 March 2005 12:24 PM

About 250bhp. more trans losses on a 4wd than a 2wd though. figure is approx.

STi Blues 15 March 2005 12:26 PM

Yeah it is a JDM - make reckons that calculation is on the safe side - could even by more - multply by 1.843765 and you get over 387bhp at the flywheel. He also said that to calculate torque you multiply flywheel bhp by 1.3554 - that means my WRX 03 isrunning 524lb/ft torue - looks like I need a new clutch - any recommendations? :)

DazW 15 March 2005 12:27 PM

iirc:

FWD 12-15% Transmission Loss
RWD 17-19%
AWD 22-25%

so 270-280

ex-webby 15 March 2005 12:28 PM

:cry:

When's April 1st????? ;)

Regards,
Shaun.

STi Blues 15 March 2005 12:29 PM

Yeah, yeah - I know - the things you have to do to get an answer on Scoobynet nowadays!
Thanks anyway chaps! :)

punkie 15 March 2005 12:31 PM


Originally Posted by STi Blues
Yeah it is a JDM - make reckons that calculation is on the safe side - could even by more - multply by 1.843765 and you get over 387bhp at the flywheel. He also said that to calculate torque you multiply flywheel bhp by 1.3554 - that means my WRX 03 isrunning 524lb/ft torue - looks like I need a new clutch - any recommendations? :)

Yeah, i believe a new company do a very good clutch, it's called........get your head out of the clouds !!!!

STi Blues 15 March 2005 04:50 PM

Do you mean I could be getting even more torque than that? Could I install a clutch from say a diesel lorry - which is used to very high torque anyway? :idea:

Graz 15 March 2005 05:25 PM

Doh! Can't believe I fell for this, anyway it got moved to the wrong forum, should be in Muppets :p

David_Wallis 16 March 2005 08:43 AM


guess an air filter should get me over the 400 mark - TOTBIV here I come - be ready!
You'll need more than that for totb... I suggest you try scoobyshootout instead.

David

STi Blues 16 March 2005 09:27 AM

Thanks everyone - my original question was serious - I just had to elaborate to get a response - I am picking up a JDM 03 WRX on Friday and know it has been dyno'd at 210bhp at the wheels - just wondered whatthis was at flywheel so I could compare to my much loved MY97 Sti (300+ Bhp) which will be going.

I guess from comments I am in the 250/260 range.

Cheers :)

David_Wallis 16 March 2005 09:41 AM

well late 460 something got me 521 at Flywheel. (dyno dynamics)


All times are GMT +1. The time now is 01:16 AM.


© 2024 MH Sub I, LLC dba Internet Brands