*** MY99-00 Owners - Filter/Induction Kit Poll ***
 

I would appreciate your responses to the above poll, please reply to the thread if you've anything to add, I'm trying to get an overall feel for whether changing the standard filter is a reasonable and safe thing to do.

Regards
MY99DBMClassic

Yeah reasonable and safe if you have a couple of grand spare
to repl the short motor after the MAf goes hay wire and causes the
fueling to go lean thus burning a nice big hole in no 4 piston !
First hand experience ! " you just cant bet it "

Of course i did mean to say
" You just cant beat it "

UK MY99 with full de-cat and Rampod induction kit - 20k no issues

My MAF did fail, but that was using the APS CAI kit (not noticed until the Link was replaced with the standard ECU)

Ran a MY00 with a full de-cat and K&N induction kit for 6 months with no issues.

UK MY99 Full decat, Tek2 and K&N, had a MAF failer but unsure whether this was due to induction kit. no problems for 9 months

Mate had a cone filter on a year without any trouble,mates just had maf go down after 2 engine rebuilds with std airbox on as it doesnt always bring the faultcode up untill its totally f*cked,luckily subaru warranties have picked up the bill both times(this last time they replaced the maf) you can pick mafs up for around 80 quid so if you suspect it bein faulty or if you can get it checked just replace it, thinkin of doin it every couple of year 2b honest lol beats the price of a rebuild,but to date no probs on mine,just the luck of the draw really. http://img.photobucket.com/albums/v3...obymad/eb2.jpg

[QUOTE=ukdave]Mate had a cone filter on a year without any trouble,mates just had maf go down after 2 engine rebuilds with std airbox on as it doesnt always bring the faultcode up untill its totally f*cked,luckily subaru warranties have picked up the bill both times(this last time they replaced the maf) you can pick mafs up for around 80 quid so if you suspect it bein faulty or if you can get it checked just replace it, thinkin of doin it every couple of year 2b honest lol beats the price of a rebuild,but to date no probs on mine,just the luck of the draw really. http://img.photobucket.com/albums/v365/scoobymad/eb2.jpg[/QUOTE]

Nuff said above to convince me

new to the scene-had an ITG FILTER on for about 6 weeks, read thread on ITG filters(oiled),took it off. back to standard. bought simota induction kit put on for 5-6 weeks,read thread on induction kits,took it off. bought spare MAF.had original checked everything ok and fine.Subaru told me car would almost stall when coming to a halt if the maf knackered.car running fine for 6 months.:)

Lee

know what you mean.
to many know it alls

Had an ITG (panel) on for about 6months then changed for K & N (panel) no MAF problems at all then.
The MAF did go which was the same day i put in the Prodrive ECU.

Imported a heavily modified my99 sti earlier this year, apexi cone - however the decat was removed at SVA, have just installed full "thro" 3" bespoke Group A exhaust - but only have done so after purchasing a GEMS which will allow remapping.

The car had a MAF fault when imported, I also repeatedly get a CEL indicating Lambda and MAF problem. I have drove her very steady - not wanting to risk problems