Cannister hoses
 

I would like to remove the plastic cannister under the bonnet of my p1, and totally de-hose it. I guess that the bottom hose goes back to the fuel tank, could somebody please tell me where the 2 top hoses go to that dissapear under the inlet manifold.

Cheers....Rob.

bottom hose is a vent to the chassis leg.
one of the top hoses is a vent for gases from the fuel tank, the other is from the purge solenoid I believe.
UK cars of a 99 age have three and the third is a return to the inlet.

just T all three together with an unequal T piece and stick the bottom one back into its little hole down behind the headlight.
like this

Andy

i t'd all mine together (thanks peanuts for the advice a few weeks back)

before:
http://img.photobucket.com/albums/09...ton/CARBON.jpg

after:
http://img.photobucket.com/albums/09...n/ccpipes2.jpg

http://img.photobucket.com/albums/09...on/ccpipes.jpg

i got a selection of t peices and piping from a local hydrolics company, cost less than a fiver.

DP

:)

Thanks for the info lads, going to try and find a Y peice tommorow