ScoobyNet.com - Subaru Enthusiast Forum

ScoobyNet.com - Subaru Enthusiast Forum (https://www.scoobynet.com/)
-   General Technical (https://www.scoobynet.com/general-technical-10/)
-   -   what turbo?????? (https://www.scoobynet.com/general-technical-10/379782-what-turbo.html)

mystery inc. 15 November 2004 04:10 PM

what turbo??????
 
im after a diffrent turbo for my wrx. currently running a tdo5 16g. i was thinking of a vf range turbo the vf34 roller bearing.i can get these new from usa for 900 dollars. what do you ppl think. i have seen the tdo5/o6 20g but it cost more than one of these. cant aford 900 pound for turbo

The Fixer 15 November 2004 04:14 PM

TD05 will produce more power than VF34 IMHO. What power are you looking for?

mystery inc. 15 November 2004 04:26 PM

im looking for about 350+. my tdo5 has too much play in it. turbo technics want about 600 pound to recon the turbo or 600+vat for a new one. in the usa i can only fin d vf range turbos. they rate them quite good. i thought they would be better because they are roller bearing

mystery inc. 15 November 2004 04:28 PM

http://www.rallysportdirect.com/shop...370413a2c1d6ed

this is the site

madou 15 November 2004 06:07 PM

Rebuild or buy new

http://www.deadboltspeed.com/td05.htm

The Fixer 15 November 2004 06:19 PM

Best bet would be to find yourself a secondhand TD05 or get your TD05 reconditioned, try Turbo Dynamics ;)

Dont forget it wont be just $900, there will be shipping, import duty and the lovely VAT to add ;)

Andy.F 15 November 2004 08:49 PM

You can get the TD05 recon'd for under £200 and it will match any VF on the market !

Andy

mystery inc. 15 November 2004 11:48 PM

andy where can u get my tdo5 recond for 200?thanks for the advice lads.i will be keeping my tdo5,

Roojai 16 November 2004 08:18 AM

turbo technics quote 150 for new seals and bearings.

I sent mine to turbo dynamics due to a bad review for turbo technics and aftre they checked it the quoted me 380, which was 450 odd after VAT (needed a new core).

When it came back it looked like a brand new turbo.

Andy.F 16 November 2004 11:22 AM


Originally Posted by mystery inc.
andy where can u get my tdo5 recond for 200?thanks for the advice lads.i will be keeping my tdo5,

Assuming it has not actually failed and broken the turbine wheel or casing then it can be fully serviced with new bearings, seals and thrusts, ported to match your exhaust system (if upgraded ?) and returned to you within 3 days for no more than the price quoted above.

Andy

I'll PM you my workshop address.

The Fixer 16 November 2004 01:10 PM


Originally Posted by Andy.F
Assuming it has not actually failed and broken the turbine wheel or casing then it can be fully serviced with new bearings, seals and thrusts, ported to match your exhaust system (if upgraded ?) and returned to you within 3 days for no more than the price quoted above.

Andy

I'll PM you my workshop address.


lol ;) No more blatent than me :D

marklemac 16 November 2004 03:38 PM

Maybe a stupid question, but what does TD stand for in TD05 etc etc ?

catsteve 16 November 2004 09:02 PM

i have been advised to get a vf turbo for my 97 catalunya(td04???).nothing wrong with turbo in it but just wanting more power.would i be better with a td05 aswell??

vulnax999 16 November 2004 10:52 PM

Most likely!

Boost threshold will rise by about 500 rpm, and is not as sprightly as a TD04, but will give better torque and power once it gets going.


All times are GMT +1. The time now is 04:14 AM.


© 2024 MH Sub I, LLC dba Internet Brands