Any thoughts on Power?
 

Okay…I am nearly at the end of spending money on my Scooby…and have only 2 more mods to carry out, which are in the list below.

I am under the assumption that the mods below should get me near 340BHP, :norty:

Am I correct or am I missing something on the list? :cuckoo:

Apexi ECU
Apexi Power FC Commander
Apexi 3 Port Boost Solenoid Kit
Apexi Induction Kit sti 5
Apexi ACV-r Boost Controller
Iridium Spark Plugs
Walbro Fuel Pump
Walbro Fuel Pressure Regulator
Blitz Nur-Spec R System 4” Tail with Jap Innovations De-Cat Down-Pipe
H&S Up-pipe
TD05 FE Turbo
Helix Oil Catch Can
440cc Injectors – awaiting delivery
HYBIRD FMIC – still to order

your 440cc Injectors will be your downfall with a tdo5 turbo and fmic, ive seen cars with similar spec do 370bhp ish with 550cc injectors, or mine got 320bhp with the tmic and 440cc injectors

Okay...a little bit too late, as I have now paid for the injectors...I did put a post up a while back for the injectors, and the 440's were found to be sufficient...

Assuming that you got 320bhp with a tmic, surely with a fmic, I can expect near 330 - 340bhp? :(

Sam, dont always assume that a tmic is inferior to a fmic ;)
it doesnt necessarily follow that a fmic will produce more, undeniably though, generally that is the case.

Okay..now your confusing me.... :iamwithst :)

it was an uprated tmic ;) and it was running my td05 at 1.6bar ;) lets see if your fmic will let you do that safely ;)

oops forgot to say on the R&R i only made 1.1 bar peak ;)

440s should be good for 330-340bhp

Steve, is it an off-the-shelf uprated or a "custom" job ?

Sam,
the fastetest impreza down the strip 1/4mile has a Tmic ;) (AndyF)

its a proper custom made one, the core is about 1 and 1/2 times the volume of a standard my99 and has better cooling due to wider fins etc etc :

pm details please... :D:D

similar route myself but cant find my library ticket ;)
did you purchase core individually, what type of system is it, etc etc

purdy purlease ;)

With the 440's you will need to up the rail pressure to about 4bar static. then they will be good for 340-350bhp.

440`s will be fine IMO

with 4 bar static pressure on the fuel you will need to have a spare couple of lengths of fuel hose and some very heavy duty clamps.

you may well get a few leaks...