ScoobyNet.com - Subaru Enthusiast Forum

ScoobyNet.com - Subaru Enthusiast Forum (https://www.scoobynet.com/)
-   Lighting and Other Electrical (https://www.scoobynet.com/lighting-and-other-electrical-14/)
-   -   Fitting UK Rear Foglight Switch Into JDM (https://www.scoobynet.com/lighting-and-other-electrical-14/374621-fitting-uk-rear-foglight-switch-into-jdm.html)

Rusty. 27 October 2004 09:46 PM

Fitting UK Rear Foglight Switch Into JDM
 
I have just had a go with search with no joy, so hoping someone else has done this and is willing to share... :)

I have a MY02 WRX which has had two wires run from the boot (spot for fog light bulb in original O/S/R light cluster. One is blue (earth?) and other is red (live?).

From what I can see, these have been "plugged" into a four pin on/off switch mouted in switch bay, to the lower right of steering wheel (normal place).

In addition, there is another red wire and and blue wire (assume being feed from headlights) so that when the lights are on, I can turn on the fog lights (also illuminating the switch bulb).

Interestingly, of the four pins on this switch, the blue and black one have been spliced onto one pin and the two red ones each have their own with the fourth pin free.

This set up works fine....but makes the dash looks crap :(

The joys of ebay allowed me to purchase a UK rear fog light switch but I it has six pins and I can not see a plug in the existing loom - thought there should be one?!?! :confused:

Anyway, Can someone let me know which wires go in which pins so that the UK switch illuminates the picture when sidelights are on and then activation bulb also illuminates when I turn on the fog light on please?

Yes, I do have a wiring diagram, but I find it easier to use it as a recipe for making spaghetti bolognase :p

SCOOBY TOWERS 30 November 2004 10:38 PM

Jon,
I have the wiring diagram for a UK switch, but its on paper and my scanner ain't up and running yet.
Mail / call / text me with a fax no and I'll send you a copy.

Chris

scooby city 01 December 2004 08:31 PM


Originally Posted by SCOOBY TOWERS
Jon,
I have the wiring diagram for a UK switch, but its on paper and my scanner ain't up and running yet.
Mail / call / text me with a fax no and I'll send you a copy.

Chris


hi chris

would that be the same as a my03?

Rusty. 01 December 2004 08:35 PM

Works Fax = 01946 834 714

You still coming to the Grizedale Rally on Saturday Chris?

SCOOBY TOWERS 02 December 2004 10:17 PM

Doubt it.
It was my birthday on the 1st and er indoors is taking me away for the night (Fri) so I don't think I'll get back in time.
Some of the LADS are going - check out the web site for info.

I'll fax you a copy when I get back to work (Tue 7th).

S- City - Havn't a clue, but your welcome to a copy - drop me a e mail chris.towers@baesystems.com with your fax no and I'll do it first thing Tue

Chris

Rusty. 02 December 2004 10:45 PM

many happy returns you old git :p :D:D

Have a good un and I'll keep an eye out for the LADSOC convoy ;)

SCOOBY TOWERS 05 December 2004 09:44 PM

Less of the git IYDM :D

scooby city 08 December 2004 04:54 PM


Originally Posted by SCOOBY TOWERS
Doubt it.
It was my birthday on the 1st and er indoors is taking me away for the night (Fri) so I don't think I'll get back in time.
Some of the LADS are going - check out the web site for info.

I'll fax you a copy when I get back to work (Tue 7th).

S- City - Havn't a clue, but your welcome to a copy - drop me a e mail chris.towers@baesystems.com with your fax no and I'll do it first thing Tue

Chris


u have a e mail


All times are GMT +1. The time now is 08:23 PM.


© 2024 MH Sub I, LLC dba Internet Brands