ScoobyNet.com - Subaru Enthusiast Forum

ScoobyNet.com - Subaru Enthusiast Forum (https://www.scoobynet.com/)
-   Drivetrain (https://www.scoobynet.com/drivetrain-11/)
-   -   Twin Scroll? (https://www.scoobynet.com/drivetrain-11/351590-twin-scroll.html)

RB5_245 09 August 2004 12:31 PM

Twin Scroll?
 
Anyone with the twin scroll turbo care to say at what rpm it starts to spool up??

Cheers

Dave

AndyC_772 09 August 2004 12:34 PM

The torque curve in the '05 JDM brochure shows almost max torque at 2,500 rpm :D

SPEN555 09 August 2004 12:35 PM

I have about zero at 3k, boot it at this point and the boost builds very rapidly.

RB5_245 09 August 2004 01:07 PM

Cheers

AndyC_772 09 August 2004 09:23 PM

http://www.subaru.co.jp/impreza/wrx/...09/imgs/p1.gif

Bob Rawle 09 August 2004 09:40 PM

Depends at what revs and throttle you start, in 4th gear starting at 1800 rpm with foot to the floor I start to get boost immediately and achieve 1 bar at 2700 rpm, too early actually, boost doesn't start at any particular rpm point, it vary's according to how you are driving. My peak torque arrives at 3500, but it is 370 ft lbs at 1.55 bar boost.

bob

GRIFF007 10 September 2004 11:27 AM


Originally Posted by Bob Rawle
Depends at what revs and throttle you start, in 4th gear starting at 1800 rpm with foot to the floor I start to get boost immediately and achieve 1 bar at 2700 rpm, too early actually, boost doesn't start at any particular rpm point, it vary's according to how you are driving. My peak torque arrives at 3500, but it is 370 ft lbs at 1.55 bar boost.

bob

what mods do you suggest on an 03 / 04 / 05 Euro car to achieve 350lb ft as a reliable daily driver (no track work)

as above but for JDM twin scroll


All times are GMT +1. The time now is 10:17 PM.


© 2024 MH Sub I, LLC dba Internet Brands