Hi-Spec Disc's.....
i was just wondering if anybody knows how thick the Hi-Spec 310mm vented front disc's are when new,and what the minimum thickness of them is when worn?
also,i need to know who else does a 310mm front disc,i can replace the Hi-Spec ones for,as i dont think i will be putting them on again,after all the bad reports ive been hearing about them on here... cheers BM :) |
BTTT for some help...
BM:) |
surely someone on here can help me with this...
BM |
Have you asked Ian @ Godspeed to see if he can make you some discs. He'll either need to know the spec of the existing Hi-Spec alloy hubs or need to get discs/hubs made to work with the Hi-Spec calipers.
Stefan |
Originally Posted by ozzy
Have you asked Ian @ Godspeed to see if he can make you some discs. He'll either need to know the spec of the existing Hi-Spec alloy hubs or need to get discs/hubs made to work with the Hi-Spec calipers.
Stefan http://img16.photobucket.com/albums/...1-2003_011.jpg this is what i have on at the moment |
I'm not experienced enough to say for sure, was merely looking at it logically. The caliper will be a certain distance from the centre of the wheel hub in two planes. One being out to the left in your picture and the other being towards you (again looking at the photo).
The caliper is pushed out with it's bracket and would determine the first measurement and the thickness of the alloy bell (together with the caliper) would determine how this sits out from the wheel hub. There's also the issue of the existing holes in your alloy bell matching up with the mounting holes in the non-Hi-Spec discs (e.g AP discs). Certainly the thickness and the diameter of the disc should mean that it's a direct replacement, but how it mounts in the existing Hi-Spec hub would determine it's compatibility. Just my own thoughts own it, but Ian has the hands-on and years of experience to say for sure. Stefan |
All times are GMT +1. The time now is 09:45 AM. |
© 2024 MH Sub I, LLC dba Internet Brands