"Angel-Eye" Headlamps Fitting
Any information would be greatly appreciated...
Does anyone have fitting / wiring instructions for these beggars? I'm trying to wire them up to a MY98 Impreza but I'm at the stage where I need to use the car quite soon so any advice would be most useful. |
Do you not have the loom with them? Should be a straight fit onto existing headlamp plug with a requirement to splice into the sidelights for the "Angel Eyes" part.
If no loom, can send you the diagram of the layout. Alan :cool: |
Originally Posted by AlanG
Do you not have the loom with them? Should be a straight fit onto existing headlamp plug with a requirement to splice into the sidelights for the "Angel Eyes" part.
If no loom, can send you the diagram of the layout. Alan :cool: Lastly, can you recommend a way to splice into the sidelamp wires? Ta, Ken |
http://www.ravensblade-impreza.com/m...e/morette.html
not angel eyes - but may help to 'refresh' your memory of Morettes... :) alan |
I'm at work just now, so can't check my diagram, but from memory,yes, the red wire which comes from the relay goes direct to the battery.
From the "Angel Eye" part of the lamps, connect the two "sidelight" wires from one lamp unit to the other (in one assembly) and run the two wires from the second unit through the inner wing to allow soldering on to the cars' original sidelight wiring. Alan :cool: |
I would also place an in-line fuse on the red wire for the relay if it doesn't have one. (As close to the battery as possible)
|
Thanks for replying. I wasn't certain about the lights ie. was thinking about reverting back to the standard ones because I had to ensure the car was operational for work tomorrow so presently I've hooked the side lights back up and have the inner parts of the new lamps functioning (but they're dim as a dim thing!).
If I understand you correctly RE the red & black wires which come from the "Angel-Eye" part of the unit : there are two black and two red per unit. What I should do is to join the two small black wires on one lamp together, same with the small red ones, and then somehow feed these to the side light source? Also, I would like to clarify that the two larger red live leads ie. one per light with the brass end connectors should go straight onto the +ve battery terminal? Ta Again, Ken |
Originally Posted by albob
http://www.ravensblade-impreza.com/m...e/morette.html
not angel eyes - but may help to 'refresh' your memory of Morettes... :) alan Domo Arigato. (?!) |
You've got it right Ken.
All i did was cut down the +ve/-ve (red/black) wiring on one lamp to reduce cable length and splice into the other lamps' red/black wiring. The length of wiring on the second lamp unit extends into the inner wing area to wire into the sidelight. Alan |
And yes you connect the larger red wires to battery +ve
|
Gotcha now Alan. I'll give this a go later now that I'm clear on what's required. Thanks a lot for all your help!
Ken |
i know this is an odl thread but any of u guys had problems with the angel eye headlights?/
i just fitted some and a mate tells me they damaged the wiring loom as they over heat??
Originally Posted by Ken 275
Gotcha now Alan. I'll give this a go later now that I'm clear on what's required. Thanks a lot for all your help!
Ken |
Originally Posted by Murphy
i know this is an odl thread but any of u guys had problems with the angel eye headlights?/
i just fitted some and a mate tells me they damaged the wiring loom as they over heat?? I wasn't too impressed with the Angel lights and crapped it at severing my side light cables in case I should change my mind. I believe that there are lights from different sources currently circulating, some not "E" approved, watch at MoT time. I bit the bullet and fitted Morettes. Still not too impressed though with the beam, but they look really good. My recommendation would be to buy the Morettes, fit the upgraded bulbs (do a s/net search, the thread's out there!) and then put on the units. I know that I can upgrade my bulbs but they are fiddly feckers to work with - there's not a lot of space under the bonnet of an Impreza. On the original lights I ended up running 100W off-road bulbs. Illegal, I know, but they were great. Some people have said that they will over-heat your loom too; didn't happen to me. Just your luck, I suppose. I've still got the Angels in their original box... K. |
Originally Posted by AlanG
And yes you connect the larger red wires to battery +ve
stew |
anyone?
stew |
Too long ago to remember now, but IIRC, were the +ve red wires not to supply power to the relays for the lights?
|
im confused though. niether of my + wire's arnt connected. they still function proerly and give decent light
stew |
Are you sure they aren't for the leds for the angel eye effect ?
|
Originally Posted by CataIunya
Are you sure they aren't for the leds for the angel eye effect ?
stew |
just looked at my lights and they have melted!
stew aka pi**ed off |
Got a set of Angel eyes sent up last week......
and to be honest the standard of the set that was sent to me was really crap........that bad that in transit two of the lamp supports had broken sent them straight back and ordered a set of Morette's... Now they are of a totally different standard........... fitted them today and they look the dogs..... 400w on full beam NICE................. LJC |
Was just looking at some Angel Eyes on ebay, reading this has put me off a bit now...so wheres the cheapest place to get some Morettes???
|
just got them this week m8.....
total was 306.63 from scoobymania that included vat man & postage 12 less if you dont want electric adjuster........ easy to fit were in and working in 45mins....... oh btw they look great.... stuck in 80/100 and 100 for main beam 400watts on full beam like driving during the day.....
Originally Posted by Sizer
Was just looking at some Angel Eyes on ebay, reading this has put me off a bit now...so wheres the cheapest place to get some Morettes???
|
Not tooo bad, still gonna hurt but i think they do look the danglies..lol
Then they have to be painted i guess? |
Originally Posted by AlanG
(Post 3218672)
Do you not have the loom with them? Should be a straight fit onto existing headlamp plug with a requirement to splice into the sidelights for the "Angel Eyes" part.
If no loom, can send you the diagram of the layout. Alan :cool: |
Jeez....are people actually still buying these things? :rolleyes;
|
Is this a record? A 10 year old thread being resurected?
|
Originally Posted by mickywrx
(Post 11389757)
Is this a record? A 10 year old thread being resurected?
|
Knowing the search function on this site, he was probably searching for "Anglepoise".:D
|
|
All times are GMT +1. The time now is 01:05 AM. |
© 2024 MH Sub I, LLC dba Internet Brands