MY03 JDM sti boost gauge pipe ??
 

Just a quick one fitted a set of defi bf gauges at the weekend



I put the pipe from the turbo boost sender unit between the elbow on the turbo and the boost solenoid (I think) via the supplied T piece

Is this right?

It doesn’t give me any negative pressure and seems to spike quite a bit

Where should I have put it?



Tal

hi tal
i did the same m8 and got no negative neither so i ended up T'ing it in on the small pipe that comes out the front of the inlet manifold just behind where the alternator is (i think without looking again:D)
Andy

You dont fit it near the boost solenoid,do you know where your dump valve is ? Its on the right face of your intercooler.Cut the pipe that comes off the right hand side of the dump valve (small gauge tube) and insert a T piece and away you go.

Zippy

Where does the other end of the pipe go once youve done this? I got EGT Boost and Oil temp to fit anyone got a real good idiots guide to fitting these with pics???

Mark

to the boost gauge mate;)