OK the time has come...I need more power http://bbs.scoobynet.co.uk/biggrin.gif

Originally I was planning on going the Link route but;

a) Although there will be an increase it won't be enough
b) I want to build a stronger engine to run really high power that will last!

This is my plan...at the moment...

Get my hands on a pair of closed deck blocks and have them re-bored/re-lined/glaze busted as required...if I can I'll get my hands on those nice Group N squeezecast liners.

Get a decent set of matched Con Rods and Pistons (any recommendations? - within reason ie Pat, not the Titanium rods...just yet at least)

Get a WRX/STi crank (is there a difference?) lightened, balanced and Nitrided


Get some decent bearings...god knows from where...

Get the cylinder heads gas flowed and ported, is it worth changing valves?

Fit modified/different cams and solid tappets/followers (again what's available cam wise?)

Change the injectors to suit...improving the fuel rail and pumping/regulation

Use the my existing '98 spec inlet manifold coupled to a hybrid TD05 Turbo

Change the topmount intercooler for something bigger/more efficient

Fit water injection before and after the intercooler

Get the flywheel lightened and balanced (with the crank) fit a Helix Clutch

Get the/a gearbox built with decent internals

Run a Link or Motec engine management system...

For the timebeing I think I'll run with the exhaust I've got (Scoobysport/Milltek) and flow the exisiting headers...

Oh yes, i must also remember to shim the oil pump, and baffle the sump http://bbs.scoobynet.co.uk/wink.gif

There, that should do it http://bbs.scoobynet.co.uk/wink.gif for now...

Comments please http://bbs.scoobynet.co.uk/biggrin.gif

This money tree that you have, where is it? http://bbs.scoobynet.co.uk/biggrin.gif http://bbs.scoobynet.co.uk/biggrin.gif http://bbs.scoobynet.co.uk/biggrin.gif http://bbs.scoobynet.co.uk/biggrin.gif And can I have some? http://bbs.scoobynet.co.uk/biggrin.gif

Seriously though. Do Prodrive do rebuilds? or would you have visit Scooby Sport.

When it comes to mapping, visit BRD. Front intercoolers apparently increase lag. So I would have thought you would get anything much bigger in place of standard.

You may need a larger diameter exhaust system.

The rest, haven't really got much of a clue.

Once it's built, tell us all the dyno results.

P.

Hi
I know that Prodrive do some sort of rebuilds cos I know a chap who sent his g/box back to them for a little treatment!
Ron

Come on Pat, bit slow on the reply today!!!

Dan

Sell your hose, wife and get secondhand WRC!

Now for real. Many things you listed do MRT.

<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:<HR>Originally posted by RON:
<B>Hi
I know that Prodrive do some sort of rebuilds cos I know a chap who sent his g/box back to them for a little treatment!
Ron[/quote]

g/box??

Sith, 'Money Tree' oh how I wish...I'll be building this up slowly buying bits as and when I can afford too. I'll do my best to assemble the engine myself, although I'm sure I'll need help (probably physciatric - youhoo... Anders) at some point http://bbs.scoobynet.co.uk/wink.gif

I may get some of the bolt on goodies and fit them to the exisiting engine, adding the bottom end when it either goes pop, or I'm ready...

Dan; Pat knows all about this we've been plotting privately http://bbs.scoobynet.co.uk/wink.gif

Eric; Sell my Hose? Well I know I'm impressive...but don't think I need to go that low http://bbs.scoobynet.co.uk/biggrin.gif
Might buy some MRT bits we shall see...

Gary; I think Prodrive will rebuild competition Gearboxes (G/box), but not sure about those for road cars, see Stef's 'Help!!!!' thread...

Keep 'em coming peeps

Damn... everyone is doing rebuilds... http://bbs.scoobynet.co.uk/wink.gif

If ya need any help..advise.. let me know.. I have some spare time on my hands http://bbs.scoobynet.co.uk/smile.gif

J.

Tim W

Why have you got such a valuable hose?

Tim

Seem to remember the last time you embarked on the search for more power. Seem to remember you LOST power http://bbs.scoobynet.co.uk/tongue.gif

Now what mod was that ?. Seem to remember it included water.

Jonathan

Jonathan,

You're right, but THIS time, Tim is looking for a "Montego" as a donor car !!!!!!!

Mark.

Nah...Mark, I was think more along the lines of a marina or ital http://bbs.scoobynet.co.uk/wink.gif stick with the '70's stuff

Guess a "Marina" would be in keeping with your previous "water" ventures...... http://bbs.scoobynet.co.uk/biggrin.gif

Mark

LoL!!

Mine goes pretty well without an engine rebuild (yet!)

MY00, BPM GT Backbox,Mac's Power Midsection, Mac's Power downpipe, K&N Induction Kit,Large intercooler, IHI VF23 Turbo,Macs Power Intercooler Piping, Large Air intake pipe,AP Racing Clutch,Full Brembo Brake conversion, Pagid Pads, Centre console replaced with gauge setup, Intercooler Guard, Quad Headlights, Leather Interior, Aircon, Carbon Dash, Side Skirts, Colour Coded Mirrors, Running 1.3 bar of boost.

Mac..

By any chance are you a tuner/dealer ? lol

J.

Paul, I think they have you sussed. http://bbs.scoobynet.co.uk/tongue.gif

By the way that car of his is an absolute animal. Flames from its arse come as standard.

[This message has been edited by Scruff (edited 05 December 2000).]

<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:<HR>Originally posted by Scruff:
<B>....absolute animal. Flames from its arse come as standard.

[/quote]

Nothing wrong with that - or from the exhaust http://bbs.scoobynet.co.uk/biggrin.gif