ScoobyNet.com - Subaru Enthusiast Forum

ScoobyNet.com - Subaru Enthusiast Forum (https://www.scoobynet.com/)
-   ScoobyNet General (https://www.scoobynet.com/scoobynet-general-1/)
-   -   my2000 dyno results (https://www.scoobynet.com/scoobynet-general-1/272020-my2000-dyno-results.html)

gianni 15 November 2003 06:02 PM

Anyone have any bhp figures for a my2000 uk Impreza Turbo preferably for standard car or with exhaust and filter mod.

IanW 15 November 2003 06:05 PM

Mine with just the PPP backbox was 221BHP and 220 lb/ft torque IIRC.

john banks 15 November 2003 10:10 PM

Averages from published figures from four popular dynos, number of cars in brackets...

Standard MY00:
PE - 230 BHP, 217 lbft (1)
Powerstation - 201 BHP, 190 lbft (1)

Decat MY00 (with or without filter, seems to make little difference):
PE - 256 BHP, 233 lbft (1)
Powerstation - 223 BHP, 208 lbft (4)
Star - 218 BHP, 221 lbft (3)
Well Lane - 263 BHP, 248 lbft (2)

stephen emery 15 November 2003 10:14 PM

I would take ya motor to well lane ;)

steve

*Sonic* 15 November 2003 10:23 PM

At Well Lane my car did the following

MY00 239bhp/219LbsFt

the mods on the car where as follows

Magnex Decat Centre
Magnex Oval Backbox
AE800 ECU

Few more mods since then now tho, but not had it RR'd since


gianni 15 November 2003 10:35 PM

Reason I ask is the issue of the ae802 ecus on my2000 cars being slower than previous ecus but going by figures seems to make no difference, what are your thoughts Sonic.

*Sonic* 15 November 2003 10:38 PM

Forgot to mention I had an ITG Panel Filter on the car too, and it was a freezing cold February I think, and chucking it down with rain

Im not sure if an AE800 actually makes any difference on a RR, it certainly does in the real world, its nothing like a TEK 2/3 improvement (or other major remap, or even PPP for that matter)

Noticeable gain for me was the car actually carries on accelerating past 5k rpm, whereas the AE802 tails off very quickly after 5k rpm, and it got rid of the slight hesitation around 3k rpm

and it doesnt run quite so rich as the 802 either, but I havent measured it yet, its something I keep meaning to do on Delta Dash

Steve

[Edited by *Sonic* - 11/15/2003 10:39:33 PM]

Floyd 16 November 2003 12:38 AM

LOL @ 'Powerstation - 201 BHP, 190 lbft (1)' I think this was my car :(

F

john banks 16 November 2003 10:41 AM

Well, yours is the only MY00 listed as unmodified on the dyno site ;)

Brun 16 November 2003 10:48 AM

MY99 - full decat - K&N - Brd Tek3 - slipping clutch - 257bhp - 252 ib/ft torque :D @ Well Lane

[Edited by Brun - 11/16/2003 10:48:55 AM]

Flat 4x4 16 November 2003 11:11 AM

Floyd

Maybe that's the reason I have absolutely no problem keeping up with Imprezas in my Czechmate ?

Rob

Floyd 16 November 2003 02:42 PM

Rob, its run in a bit now and the miles have lossened her up nicely (205BHP or more ;) )so I may just give you a run for your money.

F
PS I'm also a driving God.


All times are GMT +1. The time now is 07:57 AM.


© 2024 MH Sub I, LLC dba Internet Brands