ScoobyNet.com - Subaru Enthusiast Forum

ScoobyNet.com - Subaru Enthusiast Forum (https://www.scoobynet.com/)
-   General Technical (https://www.scoobynet.com/general-technical-10/)
-   -   Removing the orange bits below front indicators (https://www.scoobynet.com/general-technical-10/26370-removing-the-orange-bits-below-front-indicators.html)

Kevin Greeley 10 December 2000 01:10 PM

I thought I'd paint these black - but how do I remove them please ?

Kevin.

PeteT 10 December 2000 01:30 PM

Hi Kev,
I got mine out by gently levering them at the top with a flat bladed screwdriver (wrapped in a bit of cloth to prevent scratches). They are quite robust so you shouldn't damage them.
I sprayed mine originally with normal satin black spray paint but it chipped off in a couple of weeks, so I redid them with black Hammerite Stonechip Shield ( from Halfords)which has a slightly textured satin black finish. It looks good and no chips after 5000 miles (perhaps I should spray my bonnet with it!!

Hope this helps.

AlanG 10 December 2000 05:19 PM

Better to unscrew the indicator and put your hand in to unclip the wedge. ( Assume it's MY99 onwards).
Don't fancy taking the chance with a screwdriver.

A

RON 10 December 2000 05:37 PM

I used a screwdriver, with no problem. They're not that tight so it ain't too difficult!
Ron

bob 11 December 2000 06:43 PM

I had mine removed by a scumbag, had to purchase two new ones one was 13:25 the other 13:95 I wonder why the differance in price.

STEVECHAPS 12 December 2000 04:48 PM

Bought a touch up paint from dealer,
applied 2 coats & lacquer.
Top job
SteveC

chiark 13 December 2000 08:22 AM

Dead easy to remove - just lever them out gently. Put something against the paintwork to stop damage!

Painted with a single coat of touch-up stick. Stops the front looking quite so silly http://bbs.scoobynet.co.uk/biggrin.gif. Now if only someone could come up with such a simple mod that worked for MY01... http://bbs.scoobynet.co.uk/smile.gif

Kevin Greeley 22 December 2000 12:23 PM

Thanks for all the advice but I couldn't easily lever them out without risking the paintwork, so I just got a pair of long-nosed pliers, grabbed a fin and pulled. Hey-presto !

Kevin.

Damon579 01 January 2001 04:49 AM

i took mine out this past weekend and i dicided to take out the blinker right above them. reached around the back, and pushed down the tab, and presto, it popped right out http://bbs.scoobynet.co.uk/wink.gif

i was going to paint it black as well, but my paint wouldnt hold to the orange paint, so i just went and bought so paint stripper and took off the orange paint. that was quite difficult.. but it looks a lot better in my opinion.

bigodino2 01 January 2001 10:23 AM

Hi all,

My dealer took them out and painted them silver (my car is silver). Did a lot of miles after that and no chipping whatsoever. And he did it for free!

greets, Peter

silver 01 January 2001 06:43 PM

I had mine removed by dealer and painted to match body work, looks excellent much better than the poo orange/brown original colour.

NAF 09 January 2001 08:13 PM

Yeah.....What were they thinking about by having them painted orangey/brown ?? I'd love to know who are these people who decide these things...
Judging by the MY01's front end I reckon they all must be off their heads or something! http://bbs.scoobynet.co.uk/biggrin.gif

Niall

[This message has been edited by NAF (edited 09 January 2001).]

DavidRB 10 January 2001 01:20 PM

<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:<HR>Originally posted by Damon579:
<B>...i just went and bought so paint stripper and took off the orange paint. that was quite difficult.. but it looks a lot better in my opinion.[/quote]

What colour is under the orange?

XMS 14 January 2001 04:35 AM

Has anyone tried to replace the plastic grille with mesh of any sort?

That would look very trick!

I went to the hardware store and for $2.05 got a sheet of heavy gauge flyscreen aboutthe size of the bottom grille opening (where you put your FMIC) which is enough to do about 20 cars i reckon http://bbs.scoobynet.co.uk/smile.gif

Now I know how to get the grille out, I just need to find a way of securing the flyscreen!

My car is white so it should look pretty cool, heaps better than the orange grille any how!

Nige

bigodino2 14 January 2001 07:48 PM

Hi Nige,

A friend of mine has done this and it looks great. btw I've put mesh into the big air intake (where your reg. plate is situated). Looks good too.

Cheers, Peter

XMS 15 January 2001 12:45 AM

<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:<HR>Originally posted by bigodino2:
<B>Hi Nige,

A friend of mine has done this and it looks great. btw I've put mesh into the big air intake (where your reg. plate is situated). Looks good too.

Cheers, Peter[/quote]

Thanks Peter. How did he actually attatch the mesh to the openings where the orange grilles go? Do you have any photos of it?
Cheers
Nige

mutant_matt 15 January 2001 01:32 AM

<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:<HR>Originally posted by DavidRB:
<B> What colour is under the orange?[/quote]

BLACK!!


All times are GMT +1. The time now is 04:36 PM.


© 2024 MH Sub I, LLC dba Internet Brands