If anybody has done this and could give me advice I'd be grateful (and if they could describe the symptoms also please)

cheers
Rikki

We've cured it many times.

It is almost always caused by oil in the manifold pressure sensor.

You need to remove the pipes and sensors and clean the lot out with brake cleaner or a similar solvent. Then blow it through with an air line, to remove any debris.

Last thing, lower the oil level to its correct point on the dipstick, to prevent it happeneing again.

Pete,
Could you tell me where to find the manifold pressure sensor on a MY95 please.

Andrew

Thanks Pete.

Its on a bracket between the air box and drivers side suspension turret. Its the small black box like sensor.