Just been qouted £160 by a dealer to fit my new Samco hoses :(
WTF :eek: |
If you can work a couple of simple hand held tools then you're qualified to do the work yourself :D
|
Holy Sh!t, where are you based, I'll do most of them for £50 ;)
|
If a numptie like me can do it, then you can....
Tools required ... 12mm (intercooler & dump valve bolts) & 8mm spanner (for extra tight jubilee clips) , flat screwdriver (loosening jubilee clips) , pliers ( springy clips on d/v hose ). This is for a MY00 btw, but there isn't much difference.... Check inside the hoses before you put them on, the I/C 'Y' bit had some straggly bits on the joints inside on mine. Also a good time to mount the knocklink sensor while the i/c is off if you want.... Steve |
What about the coolant?
Dont i have to refill with anti freeze or flush the system out? Can i expect any air blocks :confused: |
sorry, I was referring to the intercooler set.
|
Doh!
I forgot to mention that :rolleyes: I have the prodrive hoses already and these are the 8 coolant piece set ;) |
|
Thanks :D
The kit was missing 2 hoses :rolleyes: and i have a breather hose (no. 218) that i cant find :confused: The others are on the car so i have just got a little wait until Tuesday for the others to be sent to me ;) |
All times are GMT +1. The time now is 02:16 PM. |
© 2024 MH Sub I, LLC dba Internet Brands