ScoobyNet.com - Subaru Enthusiast Forum

ScoobyNet.com - Subaru Enthusiast Forum (https://www.scoobynet.com/)
-   Drivetrain (https://www.scoobynet.com/drivetrain-11/)
-   -   K+N cone , or panel filter (https://www.scoobynet.com/drivetrain-11/186224-k-n-cone-or-panel-filter.html)

Andy Hobson 11 March 2003 01:33 PM

After going fully for a fully decatted exhaust I found that moving from an itg panel filter to the K&N 57i induction kit definitely gave better breathing higher up the rev range. I guess that in my case with the freely flowing exhaust, the intake had become a bottleneck.

Andy.

biggerkev 11 March 2003 05:46 PM

Hi there m8 i have a sport and spoke to a local garage about panel and induction filters and they said i would be better off with the panel filter as the induction one causes problems with the air mass sensor after a period of time.He has had a few come back to him with the problem.Hope this helps.....

WEBSTER 03 October 2003 10:18 PM

Which is better for the engine a k+n cone filter induction kit or a panel filter in the standard air box ? i've got a cone at the moment but after going on the rollers and only getting 202bhp i was wondering whether the cone filter was not good for the motor , i have a bailey dump valve , I did have a japanese sports exhaust with standard cat downpipe but i now have a magnex back box with a straight through sti centre pipe with resonator removed and have just fitted 4 new coils , which filter would be better? (car is a 94 wrx wagon)

[Edited by WEBSTER - 3/10/2003 10:20:05 PM]


All times are GMT +1. The time now is 08:04 PM.


© 2024 MH Sub I, LLC dba Internet Brands