Can you measure the pressure that the wastegate is operating at by fitting a guage similar to that for the boost ??

Also do people fit uprated Wastegates and if so what does anyone recommend ??

If you want to know mail the supplier ;) :D

I use a compressor and regulator..

David

You can check your wastegate using a simple handheld pressure/vacuum pump like this

http://www.powerprobe.com/wHV90new.jpg

Apply pressure to the wastegate and when it pops open, it'll show you how much pressure it took to open.

Stefan

[Edited by ozzy - 2/4/2003 9:32:37 PM]