ScoobyNet.com - Subaru Enthusiast Forum

ScoobyNet.com - Subaru Enthusiast Forum (https://www.scoobynet.com/)
-   General Technical (https://www.scoobynet.com/general-technical-10/)
-   -   Blitz SUS (https://www.scoobynet.com/general-technical-10/170849-blitz-sus.html)

ScoobyDoo69 24 January 2003 05:20 PM

would the Blitz SUS damage me engine at all? spec of car is as follows: My01 Bugeye, PPP, Forge VTA, decat downpipe and upipe. Would anything happen? and what sort of performance gains are there?

ScoobyDoo69

kuwaiti 25 January 2003 01:18 PM

I heard the same rumors about BLITZ SUS damage the engine
But i have one and i live in dusty weather
And nothing had happen so far i hope :)

Midmotorsteve 26 January 2003 11:19 AM

I've just ordered one of these as the foam type filter i had, had bits of foam sucked into the engine, very scary, i'd prefer a bit of very fine dust than a clump of foam. The foam filter was only six months old and wasn't a cheap one £249.

Midmotorsteve 26 January 2003 11:28 AM

www.ftooc.org/newsite/contents/pages/project/filter.htm

www.mkiv.com/techarticles/filters_test/2/

hope this is of use http://www.stopstart.freeserve.co.uk/smilie/liplick.gif

[Edited by Midmotorsteve - 1/26/2003 12:38:19 PM]

ScoobyDoo69 27 January 2003 06:00 PM

i went to halfords the other night, and saw an air filter, like the blitz (stainless steel mesh etc) for £100, the guy said it was made by Piper-cross aswell, but it had a different name, does anybody know the name because i've forgot?
cheers

ScoobyDoo69

ricco 28 January 2003 01:40 PM

I've got one of those from *cough* Halfords *cough*;) It's called S-Spec or something i think. Fitting kit was crap because i have a MY97 and the one they list for MY97 is actually for pre 97 so it didn't fit:eek: Halfords sorted me a fitting kit for one that was listed as being MY98 and that fitted OK.

Pipercross need to sort out there MY's:rolleyes:

ScoobyDoo69 28 January 2003 05:25 PM

whats the performance like??
edited to say with my full decat vta and with the induction kit will i get pops and bangs etc? btw still to fit up pipe going to do it at the same time as induction kit
ScoobyDoo69

[Edited by ScoobyDoo69 - 1/28/2003 5:27:18 PM]

ScoobyDoo69 30 January 2003 03:06 PM

also will my dump vavle sound different? ive heard that once an induction kit is fitted is chatters more or something?

ScoobyDoo69


All times are GMT +1. The time now is 04:35 AM.


© 2024 MH Sub I, LLC dba Internet Brands