forge DV for P1.....worth doing..

depends on the reason for doing it

a nice chatter from the turbo... :-) its not the one where the gasses may go back into the system.... i beleive this ones v-good... no too loud either

[Edited by P1 Owner - 1/15/2003 4:09:39 PM]

I've got one on a P1, the red spring gives chatter but you have to rev high to hear it. The blue spring gives you a thskkkkkkkkkk. I'm on the blue spring and loving it :)

Cheers, m8' :-)

what model is it. on ya p1

Cheers, m8' :-)

what model is it. on ya p1

I would guess it would be the MY99-00 model seeing as the P1 was MY00 :D

Yeah, it's just the MY00 model, got if from http://www.scoobyworld.co.uk

what model DUMP valve.. u got on th ep1 mickie..

It's the Forge VTA dump valve, I just email Wendy at Scoobyworld, and told her what I wanted and what it was for. She emailed back and then I placed the order on the website for a 'Atmospheric for Impreza 1994-2000' dump valve for £146

Wendy's good at sorting out orders :D

You'll then have to ask Wendy for Forge's phone number and call them to tell them that your DV spring is the wrong type, you need the blue spring and they'll send it you for free :D

If you get chatter, its not doing its job properly as its back pressuring the turbine.

And as the chappie above said, you can barely hear it chatter. Ive heard people on here describing it like a WRC car :rolleyes: which you only get if you blank the whole DV port off (not advisable)

Pshhh noise is the one you want = blue spring.

MB

Am suprised you P1 boys are not having trouble with VTA's, tho I dont want to open up that can of worms :)

toby mark here.. been talkin gto you for a while.. got my car in with peter on wednesday.... im under the imprssion that the VTA is okay.. ? if not i wont bother. not goin gto waste my money..

Thing that gets me... all people hae thier own view, and scooby netters... well there's loads, and there is no.. YEH.. OR NEHH

lol know what u mean mark. I think you have to take most things said on here with a pinch of salt. If u want real advice then speak to someone whose company fit them all the time like Trouser at TSL or Pete Croney at ScoobySport.

Simon.

Cheers Simon aka P1 Fanatic.. what u got on your P1..?

There are a few of people on here that are techinically competent to comment :) But most posts are full of **** :D (not referring to anyone on this post obviously)

I wouldn't believe what most of the business' on here say either. :)

MB

[Edited by Dark Blue Mark - 1/16/2003 9:28:55 AM]

DBM,

I was only having a little joke mate [flame suit royally on now lol]

But...

The P1 is basically an STI-V, When I was going to put a Forge VTA on my STI-V Bob Rawle strongly advised not to as it does screw the fuelling up, now I trust Bob quite a lot as he's done a lot of mapping on my car etc, So in the end I went down the Forge Re-Circulating route, maybe I was misinformed I dunno hence my original post in this matter :)

The sensible answer is, of course, that you don't need a VTA dump valve, cos it can have some minor issues with fuelling overruns, and this is why Subaru didn't fit them.

However, if we were that sensible, we'd sell our scoobies and buy Smart cars and push bikes....Loud exhausts would be out, ECU remaps a thing of the past, gold wheels a criminal offense and nodding dogs punishable by death.

So.... in order to maintain your lifestyle - fit a Forge VTA ASAP - you don't want to be responsible for the collapse of society.

:-)

I think when it comes to the P1 - STI v the fueling is royally f'd up before we the owners get our hands on them in the UK. :D

Mickle,

That is sooo true mate :)

No P1 mate. Was looking for one for a while but just didnt have the finances/insurance background to make owning one feasible. Went for an MY00 Turbo in the end and it was the more sensible choice. I had about 2,500 posts by then so couldnt be bothered to change the name. Especially as I am still fanatical about P1's :D

TB - I didn't direct any of that to yourself!

MB

Hi Mark, peter here.

Just thought i would add, all be it a little later than anyone else as i'd only just seen this thread, not sure why you thought you were getting a vta as it would only have been a recirc, NOT a vta!
(hence why i kept saying you won't really notice its there, except when you lift the bonnet!)

quote from my original email on the subject -
'Forge dump valve, hate to say it, but this for you will do nothing other than give you a shiny thing to look at under the bonnet and im loathe to sell it to be honest as its nothing but a shiny bit for you to polish…... '

Think that just about sums up changing dump valves on a car that does not need it, running standard airbox and air filter etc :)

[Edited by ptholt - 1/16/2003 11:27:43 PM]

Cheers Peter..... U know me,, IM FLAPPING again!! :-)

im going to ask the webmaster to change your login name from p1owner to seagull cos you flap so much :)

ouy naughty!! :-)