|
Questions at the end ;)
Find a chunk of aluminum http://upload.turbosport.co.uk/getpi...4939423137.jpg Mill it to required thickness my case 38mm wide (was meant to be 40 :D) http://upload.turbosport.co.uk/getpi...4939354926.jpg http://upload.turbosport.co.uk/getpi...4939461766.jpg drill a hole in it and lathe to a 3degree pitch http://upload.turbosport.co.uk/getpi...4939585537.jpg I got a little carried away here :o (clocked it up to ensure holes got drilled in middle of plate) http://upload.turbosport.co.uk/getpi...4939414557.jpg Setout the holes (all looked ok at this point :rolleyes:) http://upload.turbosport.co.uk/getpi...1049394461.jpg Drill and tap the holes http://upload.turbosport.co.uk/getpi...4939465967.jpg Grab camera again while drilling :D http://upload.turbosport.co.uk/getpi...4939679516.jpg Cut it to length now hole distance has been decided upon http://upload.turbosport.co.uk/getpi...0553605556.jpg TADAAAAA :D http://upload.turbosport.co.uk/getpi...0553484611.jpg different angle http://upload.turbosport.co.uk/getpi...0553464680.jpg Fit and finish (well almost) http://upload.turbosport.co.uk/getpi...0553674206.jpg A :rolleyes: few modifications to Prototype No 2 will be required spacing of holes, left to right was near perfect (see how neat the ringlet sits next to the next one). However I balsed up the front to back measurement, only allowing 12.66mm instead of 15mm. Doh ! Oh and the reason I have only done three conections is...... 6 holes...so bought 6 gold plated ringlets....DOH ! the cable has 2 ends :rolleyes: Andy At the moment the ally is nice and bright but will tarnish. what do I do about corrosion protection ? (sprayed with WD-40 as temp measure :D) OK, could I have it anodised, will this reduce it's conductivity ? |
Did the earth mod just with some 16' cable and simple connectors, works even like the expansive one, but anyway, nice handjob that you did on the millingmachine...
Wally |
half way down I thought you had started to make a domino
nice work btw |
Has the mod improved the car in any way. Cold running etc? I'm thinking about this for mine as it is crap in cold weather.
|
Looks great. Puts my tatty earth mod to shame.
Someone round here a couple of weeks ago said that he could do gold plating :D I can't think of a better use. You've gone to the trouble of this much overkill, so why not IMPROVE its conductivity and protect it from corrosion :) |
have you thought about making a few of these and selling them..?????? i would deffinitly buy one..!!! let us know..!
Dan:D:D |
Good thinking Dan, i may be up for a bit of that.:)
|
How about making a shed load and selling them for £2 each - I'd have one ;)
Seriously if you do decide to sell some I'd be interested. In terms of corrosion why not coat it in the stuff which is normally on the battery terminals ? Cheers Mark |
Naughty-naughty for holding the work in a 4-jaw like that (pic.4) Should have used a faceplate? (The photo is 90* out!) Engineering critisms over, it turned out ok! As I did a 7-point earth mod ages ago it would be good to finish it off with something like that.
JohnD (ex- mechanical engineering lecturer) |
I would buy one.. thinking of doing the earth mod myself and this looks luuurvly
|
Looks very impressive. A question though - wouldn't using a single 4 AWG lead from the negative going to a distribution block and then 'starring' from there have the same effect?
|
fuzz
nice neat job but i hate to put a dampener on things, i am an electrician by trade,,copper and ally dont mix to well when conducted with electicity,they corrode,quite badly infact,, cant you get hold of any copper block to do the same job?????to stop it from corroding smear with coppa slip??? just an idea. on my new car the earth mod i used this time was a large crimp(lug)with 6 of the wires all going into the same large hole and then i crimped it . all the best mate roy |
Roy/Fuzz,
Aren't those connectors gold-plated and not copper? Stefan |
Neat, looking for a similar solution at present myself to connect 6 earth wires - neatly - to the battery terminal :D
|
Like I said - a 6-way distribution Earthing block from a Car Audio Dealer - unless anyone can tell me why it won't do the same job?
|
MRK,
£££££ from car hi-fi dealer. Those six ;) GOLD ;) connectors and 24m of 8swg cable cost £24..something (£20 cash as I know them :D) Those that want one... Are you looking for a "package" with all the cable and connectors Or just the earth Block ??? Would need to find a cheaper source for the connectors and cable to make it competative I think ?? any ideas? Also want to mod the block so that all cables tranfer out on the same side of the block, would need to re-position holes. Prototype No 2 on it's way shortly :D Andy |
If I wanted an earth mod I'd rather buy the whole thing so get your business head on and come up with a kit price :D
I'd buy one as well :) |
|
Looks good:)
I'd be interested in a kit price!!! Is the prototype 2 going to have the connection holes ofset to each other? (Rather than in pairs) Iain. |
"""Also want to mod the block so that all cables tranfer out on the same side of the block, would need to re-position holes.
Prototype No 2 on it's way shortly""" yep ;) |
Both.. Kit price would be handy or at least the componant you used so I could try and source some.. Have a friend that works in the car audio trade.. I was looking for a neat solution to the battery connection....
|
Andy, Looks Nice...
You get better tools and better scrap at work than I get at home.. Most car audio terminals are Brass and not gold.. (im not on about you andy) Alu. is a good conductor and most cables for power industry.. Ie 11kv cables are alu.. not copper.. (probably down to cost though!) Still Nice.. but not my cup of tea.. I would still go for the same but on the chassis leg.. as I would rather have it look std.. David |
""as I would rather have it look std..""
<scratches head> front intake conversion.....Front mounted house..I mean intercooler...water injection..Nos...Turbo....the list goes on. I think it's a bit late to keep her looking standard David ;) All the best Andy |
Exterior... And I dont like loads of cables on the battery... reminds me of friends early fiesta's :)
|
How many earth points do you all want ?
Is seven enough? 1. Alternator. 2. Inlet manifold. 3. Right strut turret. 4. Left strut turret. 5. ECU support bracket. 6. Left front chassis Leg. 7. Right front chassis leg. don't wan't to have to make them a third time ;) Got my eye on a full length of aluminum bar, it's just asking to be hacked up :D Andy edit as I can't count :rolleyes: [Edited by Fuzz - 1/13/2003 11:47:48 PM] |
lmao, andy you bored at work or something... done that video yet ;), or do you want me to have a pop at it... :D
|
nope, just a bit stuck in the evenings at the mo, waiting for parts to come in for a car job I have in the workshop. (snapped cam belt) doing this as a favour if he makes me a tool for making the degreed hole in this earth block everyone is interested in.
Tis a bit labour intensive, drilling it, then setting it up in the lathe, to put the degree on it.. Andy P.s I hate friggin timing up diesel engines :( p.p.s if you would like to have a go at putting something together of the RR day @ Powerstation that would be great. could combine turboteeths footage too.... up to you, I'll bring you the original tape at the star meet in Feb if you like? |
turboteeth's footage is actually my footage :) he wanted to be cameraman that day and i couldn't be arsed to film ;)
yeah bring the tape down to the meet and i'll have a play... might be a good time to test some ~ahem~ audio rendering :D [Edited by snowcrash - 1/14/2003 9:28:18 AM] |
[rant mode on]
Just because I can afford an Impreza and have enough disposable income to buy mods, doesn't mean I like throwing money away. Why pay £100+ for someone else's kit when you can do your own for a fraction of the cost. What's the point of lining someone else's pockets :confused: If I had the tools and ability, I'd make up an ally block myself. No offence, but it gets right on my nipple ends when folk say that. I can just here my Dealer say, "well if he can afford one of our cars, he can afford to pay more for parts and servicing". [/rant mode off] I was always told too spend your money wisely. The £90+ I saved will go nicely to my summer hols :) Fuzz, Top work m8. Lets us know the final costs and when you're ready to start making batches of these. I fancy one of the ally blocks myself :) Stefan P.S. I've already got all the cables and connectors on my car already, so it's just the block I need to tidy up the battery connection. [Edited by ozzy - 4/2/2003 12:50:26 AM] |
shouldn't this be in Projects forum :D:D
Oh by the way I have finally made prototype 2, not fitted to car yet, pics in due course... Andy |
| All times are GMT +1. The time now is 09:44 AM. |
© 2024 MH Sub I, LLC dba Internet Brands