It will be Alan, its just i dont know how to do it! I have e-mailed Mark to help.
Mods on the car (STI4) are a Blitz NUR spec cat back with a K&N Panel.
The customer has no Before reading available, but assures me that it has gained 23 BHP and 29 LBT.

[Edited by Flat Four Impreza Club - 12/3/2002 1:31:33 PM]

dynograph of a STI4 with a Blitz NUR Exhaust and K&N Panel Filter.
http://upload.turbosport.co.uk/getpi...1713877025.jpg
He had a power run with Mod fitted and you can see results.

No Graph before Header mod, although he had one done at PE and its gained 23BHP and 29 LBT since then .


[Edited by rb5 286 - 12/3/2002 1:27:29 PM]

I can't see that image...

{Edit to say is there meant to be one?}

{Edit again to say there is now :)}

[Edited by ChrisB - 12/3/2002 1:27:09 PM]

[Edited by ChrisB - 12/3/2002 1:35:22 PM]

Just to let you know, Trial use this product also :)

[Edited by Flat Four Impreza Club - 12/9/2002 1:08:40 PM]

after discussions with RRR preparation there is a possible group buy on offer if there are 15+

Performance Manifolds - normal cost on these are £849 + Vat,

but if i can get orders over 15 RRR will do at a gr8 price of £699 inclusive of Vat

P & P £17.50

see pic:
http://upload.turbosport.co.uk/getpi...1527776424.jpg

These are un-equal legnth so you dont loose the Flat Four Sound
Although it does make your exhaust some what LOUDER!

Good gains from this mod also, although, if mated to a standard exhaust maybe not so good.

restarted as last post was locked due to supplier not understanding this boards rules on advertising



if ur interested let me know

cheers

[Edited by rb5 286 - 11/14/2002 4:00:37 PM]

What sort of power gains can be expected if fitted with a full decat system?

Simon - P1

Would also like to know what power gains with this,and
i may have to have one.:D

bttt

HOORRAAYYYYY ;)
Im not saying a word....Apart from thanks mark.

interested if the power gains are decent, will it mate up with a blitz sytem and hks downpipe. Also is it ok with a stroker 2.2 kit?

Yes!
This item is available to fit ANY Impreza, including the New age!!!
Ive had LOADS of e-mails, but please, continue on this thread so we know where we are for future reference.
Thanks :)

Oh, and Power/Throttle responce gains are some what Improved ;)
Seen a gain of 30ilbt on a WRX !!!

bttt

Interested, will these frirt an Sti7.

Cheers

Phil

sure will m8

got 7 so far, need some more.

come on people!!!

get 16..... Delivery FREE!!!

I'll definately have one...
Rob
+YHM

To let all know, gaskets also included :)

Fitting also available on this..

is there a time limit on this m8 and how much is fitting, want one but i got to save that amount

at the moment i'm still waiting for the numbers to increase to the wanted 15 people.

dal, can u let me know how many are confirmed now as some have been contacting u direct i think.

Like vinnie, would love one, but have got to save the muller first

I have a customer asking my advice on these, but I'm not in a position to advise one way, or the other.

Different header designs will favour different rpm ranges, so please could you post some before, and after power graphs, so I can see the pro's, and con's.

Mark.

The only cons in fitting these is the noise!!!
You will get better Torque figures, but as yet no graphs are available.
Speak to anyone in the know concerning equal/Unequal legnth headers and you will get a good response from all.
There is NO downside in fitting these!!!
Fitting is dependable on what area.
Mark: Call me ;)

I'm sorry, I read this,

"Oh, and Power/Throttle responce gains are some what Improved
Seen a gain of 30ilbt on a WRX !!!"

And assumed that the gain you saw would have been on a rolling road !

What was the 30ftlb gain measured on, and at what RPM was it seen ?

Please email me your tel.no.

Mark.

Was told the gain buy a customer who fitted it! And saw the gain on his graph! Sorry, it was how it was worded :)
Gain was at 3010rpm.
YHM

Mark
Your e-mail in your profile is not correct! It not work!
Im on 01245 426678

would have said of all the people on here, mark is probably as "in the know" as you are gonna get!

This is only available to Feb at the latest for those that have called. :(