umm...anyone know how to bond as it seems to be not bonding properly..

BTTT!

You need to clean it with brake cleaner then use like tiger seal this is what body shops stick pannels with just go to any car acc's shop they will have some its like mastic but its all in the cleaning ok.

thanks fujack but would not really work?? tried plastic welding and that didn't work? it would need to be sprayed aswell.

Wheres the crack??

Ive got one and im going to rivet a metal plate on the inside, and countersink the rivet heads and then use a plastic filler over it... but will plastic weld it together with a soldering gun and then sand smooth and use a plastic filler... drop me a mail if you want more information.

David

filler is not a good option is it not?? vibrations just make it crack again..?

does anyone know what it's made from?? what type of plastic??

ttt. want my Q's answered!! ;)

right... mended mine..

Filler is fine, if its a plastic / bumper 2 Part filler...

Mine is mended... have photos... ill post them tomorrow.

Metal plate... rivet... bumper filler... jobs a good un.

David

cheers. i'll let my local paint guy do it! ;)

you know who you are!

ill beat the quote!!!

D

will you beat the distance?

lol

You must be doing something wrong if it wont stick with the stuff the body shops use because it will stick anything its black like windscreen adhesive not the grey stuff they use for sealing.Is this the stuff you used? If it aint try it dont pop rivit it!

is it the stuff we used indeed.

got any pics david?

yeah... ill upload them tonight..

David

cheers where wasyour crack?

both sides at the front.

there is a crack on the splitter above the tow bar bit on mine

no picture...will try the members gallery to see if it's there! :)

been busy will do them later...

David

DAVID,any pics yet ???????

erm.. I didnt take any pics when I did it..

the p1 splitter doesnt lend well to plastic welding.. the bumpers do.. but the splitter doesnt.. try fibreglass. or riveting a piece of metal to the back of it..