Loose Wires?
Afternoon people
This is my first post since joining ScoobyNet recently! I was hoping my first post would be a bit more positive, but such is life! This is my first Subaru and the first car I said I would try and do a majority of the work myself, if possible. I'm on a steep learning curve, so take it easy on me please lol. So recently, my radiator decided to give up, and I got a new one with top and bottom hoses as well. As I got under the car to fit the bottom hose I noticed 2 wires dangling from, what I'm guessing is, the oil filter? I'm not sure where they connect to! Temp sensor maybe? The car seems to be running fine. Can someone shed some light on this, please? My car is an 04 WRX wagon, if that helps Cheers Rik |
Have you followed to where they go? Welcome by the way |
I think the images I tried to upload were too large and didn't work. Let me try and upload screenshots, maybe that'll work.
https://cimg3.ibsrv.net/gimg/www.sco...2d9d87bcd2.jpg |
@RobsyUK
Thanks for the welcome! Hope the image helps. I can see it coming off the oil filter, but it doesn't attach anywhere? |
Oil temperature sender fitted to a sandwich plate for an aftermarket gauge,
Mick |
Your car must have had some gauges fitted in the past.
The bit that your oil filter is screwed to is an aftermarket sandwich plate those wires are the sender for either oil pressure or oil temp. take the oil filter off and just remove the sandwich plate if not needed. Obviously re fit the oil filter tho :thumb: |
Merlin beat me to the answer whilst i was writing:lol1:
|
@merlin24 @Smithys STI
Cheers lads! Glad this forum exists, I'm sure I'll be posting a lot more :) Rik |
Originally Posted by Rik_WRX
(Post 12041513)
@merlin24 @Smithys STI
Cheers lads! Glad this forum exists, I'm sure I'll be posting a lot more :) Rik |
All times are GMT +1. The time now is 06:49 PM. |
© 2024 MH Sub I, LLC dba Internet Brands