ScoobyNet.com - Subaru Enthusiast Forum

ScoobyNet.com - Subaru Enthusiast Forum (https://www.scoobynet.com/)
-   Subaru Parts (https://www.scoobynet.com/subaru-parts-451/)
-   -   Japspeed FMIC for new age (https://www.scoobynet.com/subaru-parts-451/1057579-japspeed-fmic-for-new-age.html)

Henrik 06 January 2019 11:14 PM

Japspeed FMIC for new age
 
De-tuning my car somewhat, so I've gone back to a STI TMIC, so my old Japspeed FMIC kit is up for sale. It was fitted to my 2003 WRX.

The core is still in great condition, and the pipework is good too.

One of the pipes rubbed against some body work, so I've welded it back up (see pics), but apart from that the pipework is also in good condition. The repair will be invisible once fitted, as it's facing down and to the back. The rubbing occurred where the pipe goes into the wheel arch on the drivers side).

Looking for 130, ideally collected from Bromley in Kent (our SE London). I can also send, but as it will have to go as two separate parcels (core + pipework separately), delivery will be around 20 pounds.

https://cimg1.ibsrv.net/gimg/www.sco...0c6df90aef.jpg
https://cimg8.ibsrv.net/gimg/www.sco...11ee19838c.jpg

Front of core:
https://cimg2.ibsrv.net/gimg/www.sco...783f1b6c0f.jpg

Rear of core:
https://cimg0.ibsrv.net/gimg/www.sco...a408ae435e.jpg


Repair - before:
https://cimg2.ibsrv.net/gimg/www.sco...2e4a3f59b4.jpg

Repair - after:
https://cimg1.ibsrv.net/gimg/www.sco...649ceff5b4.jpg

spindle121 07 January 2019 07:43 PM

Will this fit a 2010 Hatch. ?

Henrik 07 January 2019 09:39 PM

Hmm, I don't know for sure, but sadly I doubt it.. I'd expect the hatch pipework to be different (and maybe the bumper supports etc as well).

scoobyW 09 January 2019 08:52 PM

Pm sent

JWalle 10 January 2019 06:20 PM

Will this fit a Hawk WRX? If so I am interested.

Henrik 11 January 2019 04:16 PM

Hmm, so I am under the impression that it will fit up to 2007 (ie including hawk), given that the bug/blob/hawk are basically the same chassis's underneath the body.

It has the usual caveats that you obviously will need to cut some of the bumper etc (same as any fmic kit), but I do think it should fit.
​​
if you're interested, I will take some more photos and also make sure I definitely have all the hose clips etc (hoping to be able to get out into the workshop this weekend again)

Henrik 15 January 2019 05:46 PM

Regarding clips, I do have a hose clip for every joint, except for the one to the throttle body (then again, the one that comes off with the top mount intercooler will fit here). A couple of the clips are worm drive, however, as I managed to break one mikalor ("style") clamp, and loose another two.

Also, new lower price (130 collected, 150 posted).

Henrik 21 January 2019 12:34 PM

Bump


All times are GMT +1. The time now is 11:06 AM.


© 2024 MH Sub I, LLC dba Internet Brands