2.55 bar map sensor
Edit : turns out this is actually from a wrx hawk and not what I was led to believe. I’m informed it’ll still be good for 1.7 bar I purchased this from Matty B but never got round to fitting it. It was from a spec c or 03-06 jdm if I remember correctly. price is £25 posted https://preview.ibb.co/hXV39U/226408...D6-C819-B5.jpg https://preview.ibb.co/kv6bUU/6-F639...3-BCA2-AA9.jpg https://preview.ibb.co/dZvEG9/EA5989...768-FEF946.jpg |
What boost can i run with this 2 bar boost?
thanks. Curently have oem 03 uk sti and told max boost at map was 1.6 due to stock sensor. thanks |
Originally Posted by Croney
(Post 12030611)
What boost can i run with this 2 bar boost?
thanks. Curently have oem 03 uk sti and told max boost at map was 1.6 due to stock sensor. thanks i think std will see 1.55 without any issues and the one above I’m presuming anything over and above, I’d presume it’ll handle 2 bar but your limiting factor will be the ecu, std ecu will handle 1.7 bar I believe. The reason I never fitted the above was my build never warranted more than 1.3 bar |
Btt |
Pretty sure the JDM spec c MAP sensor allowed you to run higher boost than the stock uk sensor,
are they not 3bar sensors ? |
Originally Posted by SmurfyBhoy
(Post 12031579)
Pretty sure the JDM spec c MAP sensor allowed you to run higher boost than the stock uk sensor,
are they not 3bar sensors ? the stock map sensor allows for 1.55, the jdm spec 3 bar allows for 2 bar and the 2.55 bar allows for 1.7 bar This was sold to me as a jdm 3 bar sensor but I’ve since found out it’s a 2.55 bar map sensor from a hawk wrx I had edited the top post to show this. |
Rule of thumb is subtract 1 bar ( 1 atmpshere) from the sensor capacity and that's its limit so in this case if its a 2.55 bar sensor its limit would be around the 1.55 bar mark.
|
All times are GMT +1. The time now is 11:06 AM. |
© 2024 MH Sub I, LLC dba Internet Brands