JDM Hawkeye Speedo Conversion
I'm looking at buying a fresh import, I'm just wondering what kind of conversion can be done on a JDM hawkeye speedo to have it read in both MPH and KPH? The MOT guys here in NI are very strict on the speedo reading both.
|
Originally Posted by KwikFit
(Post 12029125)
just buy clocks from uk hawk 150-250£
|
Originally Posted by KwikFit
(Post 12029154)
yes straight swap
on the clocks |
Or buy a km to mph converter around 20£ or so , rev limiter removed and both odometer plus speedometer show miles , the only additional is the face of the speedo may show km not miles dependant on car model , charged with a sticker if you feel you need to |
Originally Posted by KwikFit
(Post 12029154)
yes straight swap
on the clocks |
The benefit of the kph to mph converter is the 112 mph limiter is in effect removed , but it’s your car your call , the wires you need access to are just under the intercooler |
Yeah the chip would be fine, but I need the speedo to have both MPH and KPH clearly marked. I'm not sure that a sticker over the dial face will illuminate properly on the defi style clocks causing me issues at MOT time.
Can anyone confirm or deny if the UK clocks will work? |
Can the speed limiter be removed by a remap? |
Originally Posted by Maverick424
(Post 12029407)
Can the speed limiter be removed by a remap? Yes. I have a JDM Legacy Gen 4 that is pretty much the same DBW configuration. The upper speed limiter was removed when I had a remap. But I believe the Redline on the JDM cars is higher than the UK equivalent so the clocks may not be just a straight swap. |
All times are GMT +1. The time now is 11:11 AM. |
© 2024 MH Sub I, LLC dba Internet Brands