ScoobyNet.com - Subaru Enthusiast Forum

ScoobyNet.com - Subaru Enthusiast Forum (https://www.scoobynet.com/)
-   Drivetrain (https://www.scoobynet.com/drivetrain-11/)
-   -   Best place to get a full 6speed set-up for a bugaye (https://www.scoobynet.com/drivetrain-11/1055845-best-place-to-get-a-full-6speed-set-up-for-a-bugaye.html)

DD24 26 August 2018 11:38 PM

Best place to get a full 6speed set-up for a bugaye
 
Where to get a good 6 speed set up for bugeye impreza want every thing brake calipers mounts hubs selector diff drive shafts want to swap straight over. As I'm struggling with my 4.44 five speed.

TECHNOPUG 27 August 2018 12:09 PM

https://www.scoobynet.com/full-cars-...or-spares-438/

SouthWalesSam 27 August 2018 01:24 PM

I got mine (whole package: box, diff, shafts, hubs and everything) from Steve Subaru Parts dot co dot uk.

DD24 30 August 2018 06:01 PM

Was it good stuff????

ZANY 30 August 2018 06:17 PM

Mattybr5 breaker on here will have all you need

SouthWalesSam 30 August 2018 07:49 PM


Originally Posted by DD24 (Post 12024807)
All OK with it good stuff????

I wouldn’t recommend him if I wasn’t happy.
The key criteria were met: I got everything that I needed, all components were compatible and all parts worked.
Bear in mind though, when you buy a whole package that’s been under another car for 12+ years not everything on the crate is going to look that pretty.
I wanted a really high standard refurb as I had all of the back end stripped down so for the finish I wanted some parts needed wire bushing, prep and painting.

DD24 30 August 2018 08:07 PM


Originally Posted by SouthWalesSam (Post 12024822)

I wouldn’t recommend him if I wasn’t happy.
The key criteria were met: I got everything that I needed, all components were compatible and all parts worked.
Bear in mind though, when you buy a whole package that’s been under another car for 12+ years not everything on the crate is going to look that pretty.
I wanted a really high standard refurb as I had all of the back end stripped down so for the finish I wanted some parts needed wire bushing, prep and painting.

That's OK just been stitched with my 5 speed and 3k is a lot to shell out for evething just doing my research rand see what people think. I don't know how good the 6speeds are. Ill get everything clean and polly Bush and fit to my v7 not a problem just lots of stress so far.


All times are GMT +1. The time now is 08:26 AM.


© 2024 MH Sub I, LLC dba Internet Brands