Best place to get a full 6speed set-up for a bugaye
26 August 2018, 11:38 PM
#1
Scooby Regular
Thread Starter
iTrader: (1)
Join Date: Jan 2013
Location: stoke on trent
Posts: 38
Likes: 0
Received 0 Likes
on
0 Posts
Best place to get a full 6speed set-up for a bugaye
Where to get a good 6 speed set up for bugeye impreza want every thing brake calipers mounts hubs selector diff drive shafts want to swap straight over. As I'm struggling with my 4.44 five speed.
30 August 2018, 06:17 PM
#5
Scooby Regular
Mattybr5 breaker on here will have all you need
30 August 2018, 07:49 PM
#6
I wouldn’t recommend him if I wasn’t happy.
The key criteria were met: I got everything that I needed, all components were compatible and all parts worked.
Bear in mind though, when you buy a whole package that’s been under another car for 12+ years not everything on the crate is going to look that pretty.
I wanted a really high standard refurb as I had all of the back end stripped down so for the finish I wanted some parts needed wire bushing, prep and painting.
The key criteria were met: I got everything that I needed, all components were compatible and all parts worked.
Bear in mind though, when you buy a whole package that’s been under another car for 12+ years not everything on the crate is going to look that pretty.
I wanted a really high standard refurb as I had all of the back end stripped down so for the finish I wanted some parts needed wire bushing, prep and painting.
30 August 2018, 08:07 PM
#7
Scooby Regular
Thread Starter
iTrader: (1)
Join Date: Jan 2013
Location: stoke on trent
Posts: 38
Likes: 0
Received 0 Likes
on
0 Posts
I wouldn’t recommend him if I wasn’t happy.
The key criteria were met: I got everything that I needed, all components were compatible and all parts worked.
Bear in mind though, when you buy a whole package that’s been under another car for 12+ years not everything on the crate is going to look that pretty.
I wanted a really high standard refurb as I had all of the back end stripped down so for the finish I wanted some parts needed wire bushing, prep and painting.
Thread
Thread Starter
Forum
Replies
Last Post
Ian
ScoobyNet General
4
10 May 2008 09:38 PM